Qnap – USB 3.2 Gen 2 Dual-Port PCIE Expansion Card

Up to 10Gbps Speeds for Fast File Transfer and Storage Expansion

Features:

The QNAP USB 3.2 Gen 2 Expansion Card provides speeds of up to 10Gbps – double that of USB 3.2 Gen 1 – to greatly boost data transfer speeds. With two ports, the QNAP USB 3.2 Gen 2 Expansion Card provides compatibility with newer, faster USB 3.2 Gen 2 devices to accelerate file transfers and backup. The QNAP USB 3.2 Gen 2 Expansion Card can be installed in either a QNAP NAS or Windows®/Ubuntu® PC.

1 Dual-port USB 3.2 Gen 2 Type-A connectivity. Both ports provide up to 10 Gbps data transfer speeds and are backwards compatible with previous-generation USB devices.

2 Supports USB Attached SCSI Protocol (UASP) to provide convenient fast file sharing and intensive data transfer.

3 Uses advanced low-power processes, following standard PCIe/USB bus Power Management to reduce power consumption.

4 Supports overcurrent detection and short circuit protection.

5 Supports Windows 8.x / 10 (32/64-bit) and Ubuntu desktop 20.04 LTS. No driver is required.

Experience USB 3.2 Gen 2 SuperSpeed+ up to 10Gbps:

The QNAP USB 3.2 Gen 2 Expansion Card provides speeds of up to 10Gbps – double that of USB 3.2 Gen 1, and 20 times that of USB 2.0.

Expand your Storage by Connecting to a QNAP USB JBOD:

By using a QNAP USB 3.2 Gen 2 Expansion Card in your QNAP NAS or PC, you can connect a QNAP USB JBOD to back up and expand your storage.

The USB 3.2 Gen 2 Expansion Card supports both QNAP NAS and Windows®/Ubuntu® PCs without requiring drivers.

You can configure RAID and monitor disk health using the QTS/QuTS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on your computer.

Hardware Specifications:

Connectors
2 x USB Type-A

USB Host controller
ASMedia ASM3142
PCIe and Lanes PCIe Gen2 x 2

Bracket
Low-profile pre-installed. Low-profile and Full-height are included.

Form Factor
Low-profile 89.65 x 68.9 x 14 mm (Without bracket)

Working Temperature
0 ~ 40 ºC (32 ~ 104ºF)

Working Humidity
5 ~ 95% RH

Supported Operating System
QTS 4.3.6 (or later)
QuTS hero
Windows 8.x/10 (32/64-bit)
Ubuntu 20.04 LTS

What’s in the box
1 x USB expansion card
1 x QIG
2 x Brackets