Soup up your fireplace with a premium quality exhaust system! Crafted from resilient 304 grade steel, our flues are top quality, CE-certified and manufactured in Greece. They come in the natural stainless-steel finish.
This flue kit is compatible with the Pure Stoves closed combustion fireplaces currently sold on Takealot which can take a 100mm flue. Designed for single story homes with standard ceiling height - flues protruding through the lower section of a sloped roof or flat roof (3D Drawing with Explanations attached). Additional pieces can be purchased to extend the flues where required. Alternatively search the internet for a flues calculator to determine the parts required.
Internal Flues are single skin in order to give off more heat to the room and reduce overall cost. They are made up of an adaptor to start with, then 1m duct, 0.5m duct and 0.25m duct. The 0.25m piece is optional and can be left out if getting too close to the ceiling.
Insulated flues need to start below the ceiling and go all the way up to the cowl. Insulated flues are used for fire safety; to prolong the life of your roof seal and to avoid harmful condensation leaking into your fireplace and causing premature wear and tear.
What’s Excluded? There is no roof seal included in this set. Appropriate roof seal can either be supplied by your fireplace installer or you can purchase on Takealot. Two roof seal options are Waterproof Slope Roof Flashing for Pipe Diameter 80mm - 190mm, or Waterproof roof flashing for pipe diameter 110mm - 155mm depending on your roof type.
Features:
- Push fit with high tolerance and clamp system
- Additional parts can be purchased to modify or expand the system
- Bell cowl is one of the best cowls on the SA market in terms leak prevention
- Robotically welded, exceptionally neat seams
- Beautiful highly refined finish
Specifications:
- 100mm Internal Diameter of Single Skin Flues
- 100mm Internal Diameter of Insulated Flues
- 150mm External Diameter of Insulated Flues
- 25mm Rockwool Insulation
- Produced under ISO 9001:2008 Quality Management System with CE marking Tested & Certified in accordance to strict European Regulations and Standards
- Single Skin and Insulated flues according to EN 1856-1 and EN 1856-2 standards
What's in the box
1 x 1m Single Skin Flue 100mm diameter
1 x 0.5m Single Skin Flue 100mm diameter
1 x 0.25m Single Skin Flue 100mm diameter
1 x 1m Endcap Insulated Flue 100/150
1 x 1m Insulated Flue 100/150
3 x Single Skin Clamps 100mm
2 x Insulated Clamps 150mm
1 x 150mm Ceiling Plate
1 x Bell Cowl 150mm
Note: Roof flashing is not included and can be bought separately on Takealot
