This USB ID card reader is an R20D USB proximity reader for office and indoor access control desks, used by staff who issue and read 125KHZ ID cards on Windows, Linux, and Android systems. Connect it through the USB interface and it works without installing driver software, powered by 5V at 100mA. The microelectronic RF module reads 125KHZ ID cards in under 0.2 seconds, with a reading distance of 0 to 3.15 inches and a read card pitch of 0.5 seconds, so employees move through card issuance without waiting in line. The PVC shell uses a frosted spray finish that resists scratches, and the PVC wrapped USB cable unfolds to about 1.4 meters for comfortable desk placement. Four sponge pads under the base keep the reader from sliding on smooth counters. Place it on an indoor front desk, reception counter, or office access control station to read and write ID cards during check-in, attendance, and card issuing tasks. It suits administrators and front desk staff who need a fixed USB reader for daily card handling, and it works right out of the box on Windows, Linux, and Android without driver setup. This reader is not for 13.56MHZ cards and does not read them. Do not mount it in wet outdoor areas or expose it to rain. Confirm your cards operate at 125KHZ before ordering, and place the reader on a flat, dry indoor surface so the sponge pads grip properly. Specifications:
- Item Type: ID Card Reader
- Model: R20D USB
- Material: PVC
- Operating Frequency: 125KHZ
- Reading Speed: Under 0.2 seconds
- Reading Distance: Approx. 0-80mm / 0-3.15 inches
- Read Card Pitch: 0.5 seconds
- Communication Interface: USB
- Powering Mode: USB Powering
- Working Voltage: 5V
- Working Current: 100mA
- Cable Length: Approx. 1.4 meters
- Compatible Systems: Windows, Linux, Android
- Base: Four sponge pads with removable screws Packing List:
- 1 x Card Reader
- 1 x USB Cable
What's in the box
1 x Card Reader
1 x USB Cable
