This 12V DC Water Pump is self-priming and includes an automatic pressure switch. It is commonly used in South Africa for small off-grid applications (water supply, drip irrigation, camping, boating) and portable solutions (portable gas geysers). When installed correctly, this pump provides years of quiet operation.
FEATURES:
- Includes automatic pressure switch set at 2.4bar (35PSI)
- Draws 3.0A only
- Suitable for various low-pressure applications: portable gas geysers in campers, drip irrigation systems with low-pressure sprinklers or emitters & more
- Sealed switches & electro-coating to prevent corrosion
- Soft rubber mounting tabs to reduce vibrations
SPECIFICATIONS:
- Type: Self-Priming Water Pump; 2 chamber diaphragm
- Working voltage: 12V DC
- Maximum flow: 3.8L/min
- Rated current: 2.6A
- Pressure switch: 2.4bar (35PSI)
- Inlet & outlet diameter: 9.5mm (3/8") hose barb, suitable for 10mm pipe
- Max. Liquid temperature: 60 C
- Self-priming vertical suction lift: Up to 1.2m
- Run dry: Not recommended
- Motor: Permanent magnet, Intermittent
- Duty protection: Thermal overload, automatic restart
- Dimensions [l x w x h]: 17 x 10 x 6cm
INSTRUCTIONS:
- To start and prime the pump, the discharge line must be open to prevent airlock
- The pressure switch will automatically shut off the pump when the discharge valve is closed and the pressure has risen to 2.4bar
- The pressure switch will restart the pump when the valve is open and the discharge line pressure drops
- Works well with 12V battery, solar panel connected through a 12V solar charge controller
- When using 10mm pipe, it is recommended to secure the connection with small clamps or cable ties
What's in the box
1 x 12V Water Pump with Pressure Switch, 3.8L/min, 2.4 Bar - Self-Priming
