Soup up your fireplace with a premium quality exhaust system! Crafted from resilient 304-grade steel, our flues are top quality, CE-certified and manufactured in Greece. They come in the natural stainless-steel finish.

This flue kit is compatible with all the closed combustion fireplaces currently sold on Takealot (both Hydrofire & Euro Fireplaces). Designed for single-story homes with standard ceiling height - flues protruding through the lower section of a sloped roof or flat roof (3D Drawing with Explanations attached). Additional pieces can be purchased to extend the flues where required. Alternatively, search the internet for a flues calculator to determine the parts required.

Internal Flues are single skin to give off more heat to the room and reduce overall cost. They are made up of an adaptor to start with, then 1m duct, 0.5m duct and 0.25m duct. The 0.25m piece is optional and can be left out if getting too close to the ceiling.

Insulated flues need to start below the ceiling and go all the way up to the cowl. Insulated flues are used for fire safety; to prolong the life of your roof seal and to avoid harmful condensation leaking into your fireplace and causing premature wear and tear.

What’s Excluded? There is no roof seal included in this set. Appropriate roof seal can either be supplied by your fireplace installer or you can purchase on Takealot. Two roof seal options are Slope Roof flashing for 130mm flue Kit or Flat roof flashing for 130mm flue kit depending on your roof type.

Features:
Push-fit with high tolerance and clamp system
Additional parts can be purchased to modify or expand the system
Bell cowl is one of the best cowls on the SA market in terms of leak prevention
Robotically welded, exceptionally neat seams
The beautiful highly refined finish

Specifications:
130mm Internal Diameter of Single Skin Flues
140 130mm Reducer/Adaptor fits internally into the fireplace 140mm outlet
130mm Internal Diameter of Insulated Flues
180mm External Diameter of Insulated Flues
25mm Rockwool Insulation
Produced under ISO 9001:2008 Quality Management System with CE marking Tested & Certified by strict European

Regulations & Standards
Single Skin and Insulated flues according to EN 1856-1 and EN 1856-2 standards

Note:
Roof flashing is not included and can be bought separately on Takealot

What's in the box
1 x 140/130 Reducer/Adaptor
1 x 1m Single Skin Flue 130mm diameter
1 x 0.5m Single Skin Flue 130mm diameter
1 x 0.25m Single Skin Flue 130mm diameter
1 x 1m Endcap Insulated Flue 130/180
1 x 1m Insulated Flue 130/180
4 x Single Skin Clamps 130mm
2 x Insulated Clamps 180mm
1 x 180mm Ceiling Plate
1 x Bell Cowl 180mm