Features:
-
Using advanced high temperature water pump technology to create the best water heating blanket pump, water heater bed pump.
-
The ceramic rotor is used inside. The ceramic shaft is resistant to high temperature, stable in use, free from jitter, wear-resistant, and rust-free. The noise can reach 30dB.
-
The motor windings are completely enclosed, and the resin is potted with a unique formula, which has good insulation and never leaks. preservative.
-
The use of the cylinder pump is very safe in the plumbing blanket, and it is not afraid of the aging of the power cord for a long time.
-
The temperature can reach 100 and the case temperature can reach 240 .
Specification:
Item Type: Water Pump
Flow rate: 500L/H (about 500 liters per hour)
Lift: 1 meter
Power: 7W
Power Plug: CN Plug
Voltage: 220-240V
Frequency: 50Hz
Outlet size: outer diameter 8.5mm
Inlet size: outer diameter 15mm
Heat resistant water temperature: 80
Power cord length: 1.5 meters (with plug)
Size: Approx. 8x4.9cm / 3.1x1.9inch
Package list:
1 x Water Pump
Note:
1. Dual Use: It can be used as a submersible pump (dive is limited to cold water) or as a self-priming pump.
2. This type of water pump is a centrifugal pump. It does not self-priming when used on land. It is necessary to pump water into the inlet pipe before it can be self-priming! The diving water is limited to water temperature within 40 degrees!
3. It is recommended to use 12x16mm silicone tube for inlet pipe and 8x11mm silicone tube for outlet pipe.What's in the box
Package list:
1 x Water Pump
Note:
1. Dual Use: It can be used as a submersible pump (dive is limited to cold water) or as a self-priming pump.
2. This type of water pump is a centrifugal pump. It does not self-priming when used on land. It is necessary to pump water into the inlet pipe before it can be self-priming! The diving water is limited to water temperature within 40 degrees!
3. It is recommended to use 12x16mm silicone tube for inlet pipe and 8x11mm silicone tube for outlet pipe.
