- 1. 2 Channel Relay Module Voltage : 12V; Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A
- 2. 2 Channel Relay Module 12V Comes with High-Current Relay,Trigger Current : 5mA
- 3. 12V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input
- 4. Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
- 5. 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers
Features:
- Channel: 2 Channel
- Working Voltage: DC 12V
- Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A
- Action Time (Under Rated Voltage): Less Than 10ms
- Release Time (Under Rated Voltage): Less Than 5ms
- Power Indicator (Green), Relay Status Indicator (Red)
- Module Size : 50mm x 26mm x 18.5mm (L x W x H);2"x 1"x 0.7"
- Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.
Specifications:
- Working Voltage: DC 12V
- Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A
- Action Time (Under Rated Voltage): Less Than 10ms
- Release Time (Under Rated Voltage): Less Than 5ms
- Power Indicator (Green), Relay Status Indicator (Red)
Input Interface:
- DC +: Positive Power Supply DC 12V
- DC-: Negative Power Connection
- IN1: 1 Channel Signal to Trigger The End , You Can Set High or Low Level Control Relay
- IN2: 2 Channel Signal to Trigger the End , You Can Set a High or Low Level Control Relay
Output Interface:
- NO1: Relay Normally Open Interfaces , Relay Before Floating, Shorted Pull With COM1
- COM1: Relay Common Interface
- NC1: Normally Closed Port, COM1 Relay Shorted Before and After The Pull- Vacant
- NO2:Normally Open Relay Interface, Relay Before Floating , Pull Back and COM2 Short
- COM2: 2 Common Interface Relay
- NC2: 2 - Way Normally Closed Relay Interface Relay Short Front and COM2 , Pull Vacant Post
What's in the box
2 x Channel 12V Relay Module
