Specification:
Name: 53 width heavy duty industrial slide rail
Width: 53 width
Rail size: 48 inches / 60 inches
Installation clearance: 19 0.5mm
Material: cold rolled steel
Sheet thickness: outer rail -2.0mm, middle rail -2.0mm, inner rail -2.0mm
Surface treatment: blue seal (with anti-rust and anti-oxidation effect)
Opening method: three sections fully extended
Maximum load-bearing capacity: 120kg
Scope of use: cabinet warehouse containers, financial equipment, industrial drawers, special vehicles.
1: High Load-Bearing
Made of 2mm thick high-density cold-rolled steel plate, the 60-inch drawer can keep stable and safe even when fully loaded with a weight of 57kg, and the 48-inch drawer can keep stable and safe even when fully loaded with a weight of 75kg.Drawer slides are made of high-strength, high-density cold-rolled steel and industrial-strength solid steel balls, which can withstand 60000push-pull tests without damage.
2: With locking and removable latches
The blue handle is used to lock and unlock. When fully extended or fully closed, the slide automatically remains stationary (locked state) to prevent accidental sliding, ensuring that the drawer is stable and safe. Press the locking handle lightly to unlock and the drawer can slide freely again. Press and hold the locking handle and pull it outward to separate the third track (the narrowest part) to install and remove the drawer.
3: Full extension
Smooth operation: With a three-fold full-pull design, the drawer can be fully pulled out and all items can be easily accessed. Two rows of high-quality solid steel balls are installed inside the drawer to ensure smooth operation even when fully loaded. Both make the experience of ""opening the drawer to take things"" more comfortable.
4: Corrosion and rust resistance
Our slides are treated with a special galvanized blue sealed surface, which is more corrosion-resistant than other products.
5: Installation Instructions
Please select the size of the slide rail according to the drawer depth. Drawer length slide rail length; allowable deviation is 20 mm/0.7 inches-30 mm/1 inch. The gap between the drawer and the cabinet wall should be 0.75 inches on each side (1.5 inches in total).
Note: A set of slide rails includes one pair, without screws
What's in the box
2 x Heavy Duty Drawer Slides
