2.4G Digital Wireless Camera
Screen: 7" (16:9)
Resolution: 800x480
Wireless Transmitter: Built-in 2.4GHz wireless video transmitter
Transmitter Range: Approximately 100 meters in open areas
Format: PAL/NTSC
Power Supply: DC 12V-35V wide-bandwidth
Power Consumption: 5W
Operation Mode: Keypad and Remote Control
Operating Temperature: -10 C to +40 C
Storage Temperature: -25 C to +80 C
Dimensions: 174x113x19mm
Wireless Bus Camera Parameters
Solution: 7070
TV Lines: 420 TV Lines
Wireless Transmitter: Built-in 2.4GHz wireless video transmitter
Transmitter Range: Approximately 100 meters in open areas
Format: PAL/NTSC
Power Supply: DC 12V-35V wide-bandwidth
Current Consumption: 300mA
Minimum Illumination: 1.0 Lux/F1.2 0.2 Lux/F1.2
Infrared LEDs: 18
Operating Temperature: -20 C to 70 C, RH 95% (max)
Storage Temperature: -40 C to 85 C, RH 95% (max)
Digital Wireless Video Transmission System for Port Operation Vehicles, Cranes, Harvesters, and On-Board Equipment
7-Bit Digital Wireless Video Signal Transmission
Strong Anti-Interference Rating
High Image Clarity
Wireless Video Transmission Range Up to 100 Meters in Open Areas
Wiring-Free Installation, Simple and Convenient
Monitor Operating Voltage: DC9-24V
The monitor has a built-in 2.4GHz digital wireless video signal receiver, resistant to load-dump pulses Pressure-resistant design with protection circuit.
The camera has a built-in 2.4GHz digital wireless video signal transmitter.
The camera is IP67 waterproof, has infrared night vision, and operates at a DC9-36V voltage.
This product is suitable for public transportation buses, long-distance passenger buses, school buses, agricultural tractors, heavy-duty freight trucks, rail transit vehicles, municipal road machinery and equipment, airport equipment, port and terminal cranes and forklifts, security escort vehicles, fire and ambulance vehicles, factory and supermarket forklifts, and mining machinery and equipment.
Precautions
1. This product is a microelectronic component. Please install, operate, and use it in accordance with relevant national standards.
2. For continuity between components, use the provided dedicated cables.
3. During installation, take care to prevent the connecting cables from being crushed, punctured, cut, or extended.
What's in the box
1 x Instructions
1 x 7" Car Monitor
2 x Power Cable
2 x Antennas
1 x Backup Camera
1 x Car Charger
1 x Holder
1 x Remote Control
1 x Two-sided Adhesive Tap
