Long-term parking, abnormal electronic equipment, aging circuits or forgetting to turn off the lights will accelerate the loss of the car battery. Our car battery power-off switch can effectively isolate power consumption factors and prevent excessive discharge of the battery. Through intelligent power-off technology, unnecessary power consumption of the battery is reduced, the battery health is protected from the root, and its service life is significantly extended, so that your battery always maintains good performance.
The negative connection design is adopted, and ordinary users can easily complete the installation without complicated operations. This connection method not only simplifies the installation process, but also ensures stable and reliable performance of the power-off switch. Before installation, be sure to turn off the power of the vehicle to avoid dangers such as short circuits. After the installation is completed, remember to perform an ignition test to confirm that the switch is working properly so that you can use it with confidence.
After the vehicle is turned off, turn off all lights and doors, and use the leakage detection function of the power-off switch to troubleshoot hidden dangers. When the "Low" indicator light is on, it indicates that the vehicle has a moderate leakage, with a current of about 0.5A-2A; when the "Mid" and "High" indicators are on, it means that the leakage is serious, with currents reaching 2-5A and 5A or more, respectively. Accurate leakage display helps you find problems in time and ensure battery safety.
This power off switch is equipped with an intelligent voltage monitoring system. When the battery voltage is detected to be lower than 6V, the switch will automatically cut off the power after 120 seconds to avoid power exhaustion, saving power to the maximum extent. When the voltage is higher than 30V, the remote control function is automatically disabled to prevent accidental power outages during driving and cause safety accidents. At this time, the power can only be controlled by the switch button, which provides double protection for more peace of mind.
This automatic power off switch has strong compatibility and is suitable for most 12V cars, ships, RVs and other means of transportation. Whether it is daily travel or outdoor travel, it can protect your battery. However, to ensure safe use, it is not recommended to install it on models where the battery cannot be replaced after a power outage, imported models where a power outage will trigger an alarm, or models without a spare mechanical key.
- REMOTE CONTROL MATCHING INSTRUCTIONS:
Press the manual button on continuously, and the code indicator flashes three times in 3 seconds to enter the learning state of interlocking mode. Press any button on the remote controller, and the indicator flashes three times; The buzzer rang 3 times, and the code was successfully checked; Press and hold the manual buttON on for a long time, and the code indicator will flash for 8 times to indicate the completion of code clearing; The device can store up to 20 different remote control codes.
1. Working temperature -20 degrees-+100 degrees
2. Rated current of the switch is 250A.
3. switching instantaneous current 500A a.
4. The protection threshold for power failure is 11.6V+-0.2V/23V+-0.2V.
5. power loss delay 60 seconds alarm, 120 seconds automatic disconnection.
6. Standby current is 700uA"
What's in the box
1 x Car Battery Isolator
2 x Remote Controller
