BG Anti-Theft Car Battery Switch With Automatic Power Shut-Off

Product specifications

1. The indicator light shows (light is on, off is off)
2. Automatic power off point: 11.8v/23.8v the"OFF"key of the remote controls the device point of batter level:13.3v/27v.
3. Remote RF frequency; 433MHZ{remote control matched, latching mode)

Product parameters

1. Adaptive voltage 12V /24V
2. Operating temperature l0 C~90 C
3. Switching current rating 240A
4. Switch instantaneous current S00A
5. low battery voltage point: 11.8V 0.2V/23V 0.2V
6. Power off delay disconnects for 120 seconds
7. Standby power consumption 0.004A

Remote control matching mode description:

1. Long press the stop{OFF) key of the device for 3 seconds, the green led and red led light on indicate that you have enterd the learning code state, Press the"ON"key of the remote , the green led of the device blink three times and the buzzer rings three times,then the green led and red led light on indicate that you have enterd the learning second code state, Press thexOFF"key of the remote , the green led of the device blink three times and the buzzer rings three times,end learning code.In learning code state,auto end the learning code state after 10 seconds did not receive the remote key command.
2. Long press the stop (OFF) key for 3 seconds, the green led and red led light on indicate that you have enterd the learning code state,then press 8 timers the stop(OFF) keys of the device, the green led blink 8 timers and the buzzer rings 8 times,clear all remote key .end the learning code state, the green led and red led light off.
3. The device learn up to 5 remote controls.
4. Press the"ON"key of the device or press the"ON"key of the remote, the green led and the red led of the battery level light on, Connect the negative pole of the battery to the negative pole of the car.
5. Press the"OFF"key of the device, all led of the device light off, and disconnect the negative pole of the battery to the negative pole of the car.
6. When voltage of battery is 12v~ 13v/24v~ 27v, press the"OFF"key of the remote, all led of the device light off,disconnect the negative pole of the battery to the negative pole of the car.
7. ln work on state,when voltage of battery is over 13.3v/27v,the protection led light on , press the "OFF"key of the remote,the device is no reaction, Connect.
8. ln work on state,when voltage of battery is below 11.8v/23.8v,the protection led light on , press the"OFF"key of the remote, the device is no reaction, but the device buzzer rings after 60 seconds,then the device auto work
9. off disconnect the negative pole of the battery to the negative pole).

Advertisements

What's in the box
1 x Anti-Theft Car Battery Switch
1 X Buy Goodies Keyholder