Feature
1. The sharp steel probe can easily pierce the wire insulation to check the circuit.
2. The probe pen is very suitable for checking circuits, fuses, switches and wiring in cars, trailers, boats, motorcycles and other low-voltage systems.
3. Connect the alligator clip to the ground and test the circuit with the probe. When the light is on, there is electricity.
Product usage:
1. Clamp the measured alligator clip on the ground wire (such as the metal or negative pole of the car)
2. Measure the contact between the pen tip and the conductive metal in the test circuit
3. If the light bulb of the stylus lights up, it indicates that the measured point has formed a circuit and works normally. On the contrary, the tested point has faults to be checked.
Specification
Material: ABS + Metal
Color: as shown in the figure
Clamp capacity: 20A
Bulb: 3 watt bulb (replaceable)
Voltage test range: 6v-24v
Pen length: 17.3 cm/6.8 inch
Probe length: 8.3 cm/3.3 inch
Wire Length: 96 cm/37.8 inch
What's in the box
1 x Voltage Circuit Tester
