DC 12V 0-5V 0-10V Voltage Signal Generator DAC Converter Module
- Operating Voltage : DC 12 (DC 12-25V), recommended power supply with small ripple. Operating Current : 12-13MA
- MODBUS RTU Command support 03 06 function code. CH1(O1) output voltage is 0-5V, maximum output current is 20MA. 1-5V accuracy 1%, Less than 1V there is a ripple of 50HZ/40MV.
- CH2(O2) output voltage is 0-10V, maximum output current is 20MA. 2-10V accuracy 1%, Less than 2V there is a ripple of 50HZ/80MV.
- The voltage resolution is 0.01V, the output accuracy is 1%; if the error is greater than 1%, it can be calibrated
- MODBUS commands can be made serial HyperTerminal (serial assistant) OR PLC Enter;Under the MODBUS command mode, it can support up to 247 devices in parallel.
size:45 x 35 x 15mm
Material:abs
colour:green
Package Contents:
1 x N4DAC02 12-25V 2 Channel PWM DAC RS485 Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What's in the box
1 x N4DAC02 12-25V 2 Channel PWM DAC RS485 Module
