Diy Solar Powered Racing Vehicle Educational Kit Physics Science Stem Toys Solar Car Toys
Operation Guild:
1.Assemble the small gear to the Motor with Socket Press the axle of the motor into the small gear using atabletop.
2.Place the Motor with Socket onto the Dragster Base
3.Use two tapping screws ,and the Motor Holder to lock the Motor with Socket onto the Dragster Base.
4.Use two Tapping Screws to attach the Solar Panel/Battery Switch to the Dragster Base.
5.Connect the Solar Panel with Battery Connectors and Switch to the Motor with Socket.
6.As shown, insert the negative pole and positve pole to the battery holder. Lock the wire into the slot after the battery holder is assermbled.(battery holder located on Dragster Base)
7.As Shown,attach the Universal Joint to the Solar Panel ,andattach the Universal Joint to the Universal Joint Base .Once assembled, attach the Universal Joint Base to the Dragster Body.
8.Front WHeel: Fit the Front Tire onto the Front Wheel Hub x2
-Once assembled attach axle to one Front Wheel.
Back Wheels:Fit the Back Tire onto the Back Wheel Hub x2
-Once assembled. attach both Back Wheel to the Axle with Big Gear .
9.Slide the front wheel Axle through the Front WheelHolder, and attach the second Front WheelHub to complete front wheel assembly.
10.As shown,assemble the Tail and the Tail Holder. Then, use two Tapping Screws to attach the Tail Holder to the Dragster Base,As pictured,press the back wheel assembly into the back wheel holder.Position the Big Gear, so it interlocks with the Srnall Gear,as shown.
What's in the box
1 x Diy Solar Powered Racing Vehicle Kit
1 x Manual
