This serial to ethernet converter allows you to easily send serial RS232 over ethernet for controlling equipment over longer distances than traditional serial cables. This device can be controlled and set up remotely using a handy web based interface.
Features
-Supports auto-MDI/MDIX
-Supports TCP/IP server, TCP/IP Client & UDP
-Baud rate 300bps-230400bps
-Supports Modbus RTU
-Reload function
-RS485 support full duplex and half duplex
-Supports VSPE software.
Specifications
-Chipset: IP210
-Ports: 1 port 10/100M Auto MDI-MDIX RJ45 1port RS232, 1port RS485/422
-Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3az
-Network: 10Base-T, cat3 or above UTP, 10Base-Tx, cat5 UTP
-Data rate: 10/100M
-Forwarding rate: 10 Mbps / 14,880 pps ,100 Mbps / 148,800 pps
-LED Indicators: Link/Act, Power, System, TX/RX
-Baud rate: 110bps~256000bps
-Operation modes: TCP Server, TCP Client, UDP
-Power Input: 9V-54V DC
-Power Consumption: Max 1.8W
-Operating Temperature: -10 C to 55 C
-Relative Humidity: 10%-90% (non-condensing)
Device Defaults
-ID: admin
-Password: system
-IP address: 192.168.2.1
-Operation mode: TCP server
-Transmission Mode: RS232
-Baud rate: 57600bps
-UART parameters: 57600, 8, N, 1
-Local port TCP 23, UDP 21
What's in the box
1 x Ethernet RJ45 Converter To RS232 Serial Device Adaptor
