USB Interface, USB-I2C Interface, USB 2.0, 2.97 V, 5.5 V, SSOP, 16 Pins
Product Overview
USB to I2C interface IC in 16 pin SSOP package
Single chip USB to I²C interface
Entire USB protocol handled on chip, no USB specific firmware programming required
Fully integrated 2048-byte multi-time-programmable (MTP) memory
Fully integrated clock generation with no external crystal required
512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology
FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
Configurable CBUS I/O pin
Battery charger detection
Device supplied pre-programmed with unique USB serial number
Supports bus powered, self powered and high-power bus powered USB configurations
Integrated +3.3V level converter for USB I/O
True 3.3V CMOS drive output and TTL input
Configurable I/O pin output drive strength
Integrated power-on-reset circuit
Internal 3.3V/1.8V LDO regulators
Low operating current of 8mA (typical) and USB suspend current of 125µA (typical) current
UHCI/OHCI/EHCI host controller compatible
USB 2.0 full-speed compatible
Extended operating temperature range -40 to 85?C
Product Information
USB IC Type: USB-I2C Interface
USB Standard: USB 2.0
Supply Voltage Min: 2.97V
Supply Voltage Max: 5.5V
Interface Case Style: SSOP
No. of Pins: 16Pins
Data Rate: 3.4Mbps
No. of Ports: -
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: -
MSL: MSL 3 - 168 hours
What's in the box
1 x FTDI (2081323) USB Interface
