USB Interface, USB-FIFO, USB 2.0, 2.97 V, 5.5 V, SSOP, 24 Pins
Product Overview
The FT240XS is an USB 2.0 Full-speed IC, offers a compact bridge to 8-bit wide FIFO interfaces. The device is a FIFO, capable of operating up to 1Mbps, with low power consumption (8mA). The IC includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a 8-bit wide FIFO interface.
Entire USB protocol handled on chip, no USB specific firmware programming required
Fully integrated 2048-byte MTP memory for storing device descriptors and CBUS I/O configuration
Fully integrated clock generation with no external crystal required
Data transfer rates to 1Mbps
512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology
FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
Configurable CBUS I/O pins
Transmit and receive LED drive signals
Synchronous and asynchronous bit bang interface options with RD# and WR# strobes
Battery charger detection
Device supplied pre-programmed with unique USB serial number
Supports bus powered, self powered and high-power bus powered USB configurations
Integrated +3.3V level converter for USB I/O
True 3.3V CMOS drive output and TTL input
Configurable I/O pin output drive strength
Integrated power-on-reset circuit
Low USB bandwidth consumption
UHCI/OHCI/EHCI host controller compatible
USB 2.0 full-speed compatible
Extended operating temperature range
Product Information
USB IC Type: USB-FIFO
USB Standard: USB 2.0
Supply Voltage Min: 2.97V
Supply Voltage Max: 5.5V
Interface Case Style: SSOP
No. of Pins: 24Pins
Data Rate: 1Mbps
No. of Ports: -
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: -
MSL: MSL 3 - 168 hours
What's in the box
1 x FTDI (2081332) USB Interface
