Value engineered car amplifier with JBL power and performance.
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
Features & Benefits:
Compact size - The JBL Club A600 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.
High and low level input - Speaker-level and low-level inputs allow the Club A600 to integrate with both aftermarket and factory car stereo systems.
Variable crossover and bass boost - Variable electronic crossovers and bass boost circuits allow precise system tuning and performance.
Low noise and distortion - Balanced Differential Inputs ensure low noise and distortion even at high output levels and reduce line-induced engine noise.
Input Level Control - Adjusts input sensitivity between 200mVrms and 2.0Vrms for low-level inputs and between 2Vrms and 20Vrms for high-level inputs.
Full on-board protection - Protects against shorts, high temperature, overvoltage and undervoltage, with an LED indicator for protection status.
Phase Switch - Changes input phase to inverted or non-inverted for better tuning depending on enclosure type and vehicle location.
RBC wired remote - Easy-to-install wired remote for convenient bass level adjustment from the driver's seat.
Class D amp technology - Delivers 600-Watts RMS with high output and minimum current draw.
Turn-on mode - Selectable DC/REM turn-on mode adapts to low-level or high-level signals and helps protect the battery from unwanted current drain.
Technical Specifications:
Mono subwoofer car amplifier.
350 watts RMS x1 at 4 ohms.
600 watts RMS x1 at 2 ohms.
Class D amp technology.
Variable low-pass filter: 32-320Hz, 12dB/octave.
Variable bass boost: 0-12dB at 45Hz.
Phase switch: 0 / 180 .
Preamp and speaker-level inputs.
Fuse rating: 30A x2.
8-gauge power and ground leads recommended - wiring and hardware not included with amplifier.
Dimensions: 220mm x 51.3mm x 180mm.
Dimensions: 8-11/16" x 2-1/16" x 7-1/8".
What's in the box
1 x Club A600 mono subwoofer car amplifier.
4 x 30A ATO fuses (2 installed, 2 spare).
2 x Bare wire-to-RCA adapters.
Remote bass control module.
16.5' Remote control cable with RJ-25 plugs on both ends.
2 x Self-tapping screws for remote (M3 x 15mm).
4 x Mounting screws (M4 x 53mm).
Owner's Manual.
2 x JBL stickers.
1 x Logo badge.
