KarooBraai Quality Table Braai with Fire Starter

An affordable luxury flatpack table braai where attention to the details have been acknowledged!

This item is durable and long-lasting and we paid attention to the most vulnerable components of typical braais that normally go wrong over years of use.
Get this Easy-to-Assemble KarooBraai Flat Pack Table Braai Insert with its durable, heavy duty (3mm thick fire starter components) Fire Starter, including the precision laser-cut KarooBraai branded braai grid.

NOTES to this Offer:
The inclusion of firewood in the product images is for display purposes ONLY and NO firewood will accompany an order of this item.
No text personalisation is available with this standard product.

This Basic Insert Braai is CNC laser-cut from Grade 304 and 3CR12 Stainless Steel and prepared in a way anyone could easily put together.
A comprehensive Assembly Instruction Booklet including User Tips accompanies this item.
And we include the spanners needed to do the easy assembly!

DID YOU KNOW:
Normal fire grates eventually disintegrate resulting from high temperature reached in open fires!
Strength loss (loss of temper) for steel is generally accepted to begin at about 300 C and increases rapidly after 400 C.
At 427 C, steel retains approximately 60% of its yield strength!
At 566 C, carbon steel only retains approximately 50% of its yield strength and 45% of its stiffness!
The maximum temperature that a wood-burning fire can reach depends on several factors, including the type of wood, airflow, and combustion conditions.
Under optimal conditions, such as sufficient airflow and dry wood, temperatures in a wood-burning fire can typically range from 1100 C to 1200 C.

THIS PRODUCT:
Where the high heat of the fire matters, we incorporated 3mm thick Grade 3CR12 stainless steel for the fire starter components - leaving virtually no room for unnecessary warpage in the product when used as intended.
Special braces on the back combined with a front bottom brace, ensure this unit is unbreakable in its intended use.

With only 6 bolts and nuts used in the assembly, the basic braai is assembled - add another 8 bolts and nuts and the fire starter is assembled and part of this unique braai and ready to light the fire for your braai.
The special braces slide through the side panel of the fire starter in a way where the fire starter does not 'hang' or is hooked on as per conventional braais. This fire starter is not removable after assembly and has a front support to further assist with maintaining the original state of the braai for many years to come!

And, to add to the lifespan of a single, often forgotten component of the fire starter, we supply an ember grid inside the fire starter manufactured from 10mm thick solid grade 304 stainless steel round bar!

What better than to have a precision cut, food grade 3043 stainless steel braai grid that will last a lifetime?
Three height adjustments for this KarooBraai branded braai grid are standard on the sides of this item and allows easy handling using the handle cut-outs in the grid.
Additional side support is added to all KarooBraai Laser Braai Grids. And, as a bonus, it is easy to clean!

Our KarooBraai range of products is known for superb quality in braai equipment and accessories - manufactured from the highest quality materials and workmanship - just as it should be! Highly popular braai equipment - a testimony to our successful development of new products.

Yet, even though each item is carefully crafted with precision laser cutting technology, the ambience is set when the fire is lit - bringing together the tastes from a lifetime!

GRID SIZES FOR THIS BRAAI:
Width of braai grids for each applicable braai width option are as follows:
a) 560mm x 435mm Grid - 85cm Table Braai with Fire Starter
b) 610mm x 435mm Grid - 90cm Table Braai with Fire Starter
c) 660mm x 435mm Grid - 95cm Table Braai with Fire Starter
d) 710mm x 435mm Grid - 100cm Table Braai with Fire Starter
e) 660mm x 435mm Grid - 105cm Table Braai with Fire Starter
f) 660mm x 435mm Grid - 110cm Table Braai with Fire Starter

IMPORTANT NOTE:
When selecting your braai, be sure to allow sufficiently for out-of-square building work.
If in doubt, get someone to assist with a second opinion to confirm your measurements of your braai aperture.

With an overall depth of 450mm deep (front to back) you are sure to have enough braai surface.
The KarooBraai Flat-Pack Insert Braai with Fire Starter and Ash Pan can fit into existing braai openings or simply be used as a table braai.

CARING FOR YOUR BRAAI GRID:
Braai Grids last much longer when put over the fire once embers are ready for your braai.
It is not recommended to put the grid over the fire before the embers are ready.
This rule generally applies to all types of braai grids and laser braai grids are no exception.

What's in the box
1 x KarooBraai Stainless Steel Braai Grid
1 x Side Panel with grid height adjustment
1 x Transitional Fire Starter Side Panel with grid height adjustment
1 x End Side Panel for Fire Starter /Ember Maker
1 x Rear panel of Fire Starter
1 x Front panel of Fire Starter
2 x Rear Assembly Braces
1 x Front Assembly Brace
1 x Ember Grid for Fire Starter
1 x Comprehensive Assembly Instruction & User Tips Booklet
1 x Set of Spanners & Stainless Steel Bolts & Nuts as necessary for the complete Assembly