The Kingston DDR4 8GB SODIMM RAM is an excellent upgrade for improving your computer's performance. Adding more memory is one of the most cost-effective ways to enhance your system's speed and efficiency. This upgrade ensures that your operating system and applications run smoothly and quickly. Constructed with high-quality components and tested for reliability and compatibility, Kingston's DDR4 8GB SODIMM RAM delivers a dependable boost to your computer's overall performance.
Specifications:
- Model: DDR4 Memory RAM for Laptop
- Chip: Kingston
- Capacity: 8GB
- Memory Speed: 2666MHz
- Memory Channel: Dual Channel
- CAS Latency: 2666MHz=CL19
- Pins: 260Pin
- Voltage: DDR4=1.2V
Features
Power Supply: VDD = 1.2V
VDDQ = 1.2V
VPP = 2.5V
VDDSPD = 2.20V to 3.60V
Functionality and operations comply with the DDR4 SDRAM datasheet
16 internal banks (x4, x8): 4 groups of 4 banks each
8 internal banks (x16): 2 groups of 4 banks each
Bank Grouping is applied, and CAS to CAS latency (tCCDL, tCCDS) for the banks in the same or different bank group accesses are available
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
On-Die Termination (ODT)
Per DRAM Addressability is supported
Internal Vref DQ level generation is available
Write CRC is supported at all speed grades
CA parity (Command/Address Parity) mode is supported
RoHS Compliant and Halogen-Free
Gold Finger Plating Au 0.076um (Min)
Operating Temperature 0 C to +85 C
Installation Instructions:
Please Turn off Laptop, disconnect power, and remove / disconnect battery before installation:
Step 1. Disassemble the RAM cover of your computer.
Step 2. Draw out original RAM, install Apacer RAM with the connection figure side towards slot.
Step 3. Press down Apacer memory, tighten the buckle.
NB! Please ensure RAM module is properly seated and secured before turning on the laptop
What's in the box
1 x Kingston - 8 GB DDR4 2666MHz 1.2V Laptop RAM
