KINGSTON VALUERAM 8GB DDR3-1600 DIMM - Desktop Ram
KVR16N11/8
8GB 2Rx8 1G x 64-Bit PC3-12800
CL11 240-Pin DIMM - Desktop
This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. Desktop RAM
Features:
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
Bi-directional Differential Data Strobe
Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
Asynchronous Reset
PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
Specifications:
CL(IDD) : 11 cycles
Row Cycle Time (tRCmin) : 48.125ns(min.)
Refresh to Active/Refresh : 260ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) : 35ns(min.)
Maximum Operating Power : TBD W
UL Rating : 94 V - 0
Operating Temperature : 0o C to +85o C
What's in the box
1 x Kingston ValueRam Memory DDR3-1600 - 8GB DIMM
