Basic FULL OBD2 Function
- Read and erase fault code from the engine, find out failure reason for the check engine light coming on.
- Turns off Check Engine Light (MIL), warning light, clears codes and resets monitors
- Directly show the definition of OBDII Codes, without checking online.
- Displays monitor and I/M readiness status (emission status)
- Reads and display live PCM datastream, live sensor readings, up to 50 PID/S, and show it in graphical mode.
- View freeze frame data to analyse the real cause of engine failures
- Displays live O2 oxygen sensor test data
- Enhanced OBD2 Mode 6 On-Board Monitoring Test Results for Specific Monitored Systems.
- EVAP System test data
- Retrieves vehicle information (VIN code, CIN and CVN Number)
Extra Function for KW860
- 12V car battery status check, compare with user manual to verify if your battery needs to be a replacement.
- DataStream storage and playback even on off vehicles.
- It allows you to print out 3 kinds of stored data: DTCs, Freeze frame, Live sensor readings. DIY your diagnostic reports available.
- Troubleshooter code tips guide you to find the root cause of a trouble code faster, save diagnosis and repair time.
KONNWEI KW860 supports the following list of car makes
KW860 supports both diesel and petrol vehicles, as long as the car is compliant with standard OBDII protocols, with OBDII 16pins Diagnostic Port.
American (USA) car: Standard OBD2 Cars from 1996 to Now
Chrysler, Ford, GM, Jeep
European car: Standard OBD2 Cars from 2004 to Now
Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Peugeot, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Citroen, Volvo, Fiat, VW, Ford, Jaguar.
Japanese car: Standard OBD2 Cars from 2006 to Now
KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota.
Chinese car: Standard OBD2 Cars from 2011 to Now
Note:
Even though it is compatible with most cars, some cars are a special design, so it may not compatible with some cars which do not support the OBD2 protocol. Especially the Japanese and Korean car brands.
Note:
Not Supported - Russian Cars before 2012, VAZ, UAZ, LADA.
Does not work on the following trucks - Renault, SsangYong.
Languages Currently V2.6.3 supports English, Spanish, French, Russian, German, Dutch, you may switch the language from software internal.
Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
What's in the box
1 x KW860
1 x Update Cable
1 x Manual
1 x Protective Bag
1 x Universal Socket Wrench
