USB Interface, USB Peripheral Controller, USB 2.0, 3 V, 3.6 V, LQFP, 32 Pins
Product Overview
USB peripheral controller with SPI interface. It contains the digital logic and analogue circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15KV ESD protection and programmable USB connect and disconnect.
Simplifies adding USB to any system (Microprocessor-independent USB solution)
Complies with USB specification Revision 2.0 (full-speed operation)
Integrated full-speed USB transceiver and intelligent USB Serial-Interface Engine (SIE)
Firmware/hardware control of an internal D+ Pullup resistor
Programmable 3 or 4-wire 26MHz SPI interface, handles low-level USB signalling details
Automatically handles USB flow control and double buffering
Internal comparator detects VBUS for self-powered applications
Interrupt output pin allows polled or interrupt-driven SPI interface
SETUP data has its own 8-byte FIFO, simplifying firmware
ESD protection on D+, D- and VBCOMP improves system reliability
Product Information
USB IC Type: USB Peripheral Controller
USB Standard: USB 2.0
Supply Voltage Min: 3V
Supply Voltage Max: 3.6V
Interface Case Style: LQFP
No. of Pins: 32Pins
Data Rate: 12Mbps
No. of Ports: 2 Port
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: -
MSL: MSL 1 - Unlimited
What's in the box
1 x Maxim Integrated (2518977) USB Interface
