Product Overview
The MAX485ESA+ is a Low-power Transceiver for RS-485 and RS-422 communications. Each part contains one driver and one receiver. The driver slew rate of the MAX485 is not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120 and 500µA of supply current when unloaded or fully loaded with disabled drivers. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX485 is designed for half-duplex applications.
Receiver/driver enable
300µA Quiescent current
32 Number of receivers on bus
8 Pin count
Applications
Communications & Networking, Industrial
Product Information
Device Type: Transceiver
IC Interface Type: RS422, RS485
No. of Drivers: 1Drivers
No. of Receivers: 1Receivers
Supply Voltage Min: 4.75V
Supply Voltage Max: 5.25V
Driver Case Style: SOIC
No. of Pins: 8Pins
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Product Range: -
Automotive Qualification Standard: -
MSL: -
What's in the box
1 x Maxim Integrated (MAX485ESA+) RS485/RS422 Transmitter
