Product Overview
The MAX9123EUE+ is a quad LVDS line driver with flow through pin-out in 16 pin TSSOP package. This low voltage differential signalling (LVDS) differential line driver is ideal for applications requiring high data rates, low power and low noise. The MAX9123 transmits data at speeds up to 800Mbps (400MHz) over controlled impedance media of approximately 100 ohm. The transmission media may be PCB traces, backplanes or cables. The device accepts four LVTTL/LVCMOS input levels and translates them to LVDS output signals. The MAX9123 is capable of setting all four outputs to high impedance state through two enable inputs, EN and active-low EN thus dropping device to an ultra low power state of 16mW during high impedance. Outputs conform to ANSI TIA/EIA-644 LVDS standard. It is used in digital copiers, laser printers, cell phone base stations, add drop muxes, digital cross connects, DSLAMs, network switches/routers and clock distribution.
Supply voltage range from 3V to 3.6V
Operating temperature range from -40°C to 85°C
Flow through pin-out simplifies PC board layout and reduces crosstalk
Pin compatible with DS90LV047A device
Maximum pulse skew of 250ps
Conforms to TIA/EIA-644 LVDS standard
Differential output voltage of 368mV
Offset voltage of 1.25V
Output short circuit current of -3.8mA and power off output current of 20µA
No load supply current of 9.2mA and loaded supply current of 22.7mA
Applications
Communications & Networking, Portable Devices
Product Information
Device Type: LVDS Driver
Peak-to-Peak Jitter Max: -
Supply Current Max: 11mA
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Supply Voltage Min: 3V
Supply Voltage Max: 3.6V
Driver Case Style: TSSOP
No. of Pins: 16Pins
Signaling Rate: 800Mbps
Signal Input Type: LVDS
Output Level Type: LVDS
ESD HBM: 4kV
Product Range: -
Automotive Qualification Standard: -
MSL: MSL 1 - Unlimited
What's in the box
1 x Maxim Integrated (MAX9123EUE+) LVDS Driver
