Digital to Analogue Converter, 12 bit, 3 Wire, Serial, 2.7V to 5.5V, DIP, 8 Pins
Product Overview
The MCP4821-E/P is a 12-bit 1-channel 12-bit Digital-to-Analogue Converter with internal voltage reference. This device offers high accuracy and low power consumption. Communication with the device is accomplished via a simple serial interface using SPI protocols. This device provides very high accuracy and low noise performance is suitable for applications, such as set point control, offset adjustment and sensor calibration applications.
Single channel voltage output
330µA (typical) Operating current
2.048V Internal voltage reference
Selectable unity or 2x gain output
INL ±2 LSB (typical)
DNL ±0.75 LSB Maximum
4.5µs Output settling time
SPI interface
Rail-to-rail output
Simultaneous latching of the DAC output with LDAC pin
50ppm/°C VREF Temperature coefficient
Applications
Power Management, Communications & Networking, Consumer Electronics, Industrial, Sensing & Instrumentation, Portable Devices, Automotive
Product Information
Resolution (Bits): 12bit
Sampling Rate: -
Supply Voltage Range: 2.7V to 5.5V
ADC / DAC Case Style: DIP
No. of Pins: 8Pins
Input Channel Type: Serial
Data Interface: 3 Wire, Serial
Operating Temperature Min: -40°C
Operating Temperature Max: 125°C
Product Range: -
What's in the box
1 x Digital to Analogue Converter
