Classic Standard UV Resin is preferred by the majority of consumers. Based on our customers' feedback, we have upgraded the classic resin formula. The Upgraded Resin has been improved in printing success rate, adhesion, printing accuracy, hardness, toughness, flowability, odor and cleaning. Bring you a better printing experience.
Standard Resin prints with less shrinkage and higher stability. The molding accuracy range has been increased from 0.2mm to 0.1mm which focuses on optimizing printing accuracy, make prints more detailed and richer. Besides, the viscosity of resin has been reduced to 200 cps/25 . High fluidity resin can greatly reduce the printing time, effectively improve the resin utilization rate, and ensure the high success of 3D resin printing.
Standard Resin has a better balance between toughness and resilience. The extensibility has been up to18.2% and flexural modulus to 1599.33% which make the prints are not only rich in detail but also not easy to damage. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
This product is suitable for photo cured 3D printing
equipment with a light source of 405NM.Shake well before use. It is recommended to use in an environment of 20-30 C.
The main components are acrylic oligomers, acrylic
monomers, and photoinitiators.
Contact with skin may cause skin irritation or allergic
reactions. If in contact with the body
Please rinse with plenty of water.
Please wear protective equipment, masks, and
silicone gloves when using. If it comes into contact with
the skin and causes discomfort
Reaction, please rinse with plenty of water.
This product should avoid being discharged into the
environment. After fully solidifying into a solid under
sunlight, please handle it properly.
Store at room temperature and sealed.

Material: Resin
Packaging size: 9cm x 9cm x 23cm (3.54 inches x 3.54 inches x 9.05 inches)
Weight: 1 kg (2.20 lb)

Note:
Suitable for light-curing 3D printing equipment with a light source of 405NM;
Please shake well before use. It is recommended to use in an environment of 20-30 C;
Please wear protective equipment, masks and silicone gloves when using. If it comes into contact with the skin and causes discomfort, please rinse with plenty of water;
This product should be avoided from being discharged into the environment. After fully cured into a solid in the sun, please dispose of it properly;
Store at room temperature and seal;
Please allow slight color differences due to lighting and screen settings.
Please allow slight size changes due to manual measurement.

What's in the box
1 x LCD/DLP resin (1kg)