ARM MCU, LPC Family LPC1100 Series Microcontrollers, ARM Cortex-M0, 32 bit, 50 MHz, 48 KB, 48 Pins

Product Overview
The LPC11U34FBD48/421 is a 32-bit Microcontroller based on ARM Cortex-M0 core with RISC architecture operates at a maximum frequency of 50MHz. The device incorporates 40kB internal flash, 10kB internal RAM, 4kB EEPROM, two SSP interfaces, four general purpose counters/timers, 8-channel 10-bit A/D converter with sample rates of up to 400ksps, full speed USB 2.0 device and 40 general-purpose I/O pins. This device also features peripherals like one RS-485/EIA-485 USART with support for synchronous mode and smart card interface, one inter-integrated circuit (I2C) and two serial peripheral interface (SPI) modules. It is offering low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.

ARM Cortex-M0 built-in nested vectored interrupt controller (NVIC)
Non-maskable interrupt (NMI) input selectable from several input sources
System tick timer
In-system programming (ISP) and In-application programming (IAP)
ROM-based USB drivers. flash updates via USB supported
ROM-based 32-bit integer division routines
Standard JTAG (Joint test action group) test interface for BSDL
Serial wire debug
Up to 8 GPIO pins can be selected as edge and level sensitive interrupt sources
High-current source output driver (20mA) on one pin
High-current sink driver (20mA) on true open-drain pins
Programmable windowed watchdog timer (WWDT)
USB 2.0 Full-speed device controller
Crystal oscillator with an operating range of 1MHz to 25MHz
12MHz High-frequency Internal RC oscillator (IRC)
Internal low-power, low-frequency watchdog oscillator (WDO)
PLL allows CPU operation up to the maximum CPU rate
Second, dedicated PLL is provided for USB
Integrated PMU (power management unit)
Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down

Applications
Consumer Electronics, Medical, Automation & Process Control, Industrial, Audio, Computers & Computer Peripherals

Product Information

Product Range: LPC Family LPC1100 Series Microcontrollers
No. of Bits: 32bit
Data Bus Width: 32bit
Operating Frequency Max: 50MHz
CPU Speed: 50MHz
Program Memory Size: 48KB
RAM Memory Size: 10KB
IC Case / Package: LQFP
No. of Pins: 48Pins
MCU Case Style: LQFP
No. of I/O's: 40I/O's
Interfaces: I2C, SSP, USART, USB
Embedded Interface Type: I2C, SSP, USART, USB
Supply Voltage Min: 1.8V
Supply Voltage Max: 3.6V
MCU Family: LPC
MCU Series: LPC1100
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C

What's in the box
1 x Arm Microcontroller