A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.A PVC ball valve is a type of shut-off valve made from PVC (polyvinyl chloride) plastic that uses a rotating ball with a hole through the center to control the flow of liquid or gas in a pipe.

Inside the valve is a hollow ball:

• When the hole lines up with the pipe, flow passes through.
• When the handle is turned 90 , the solid side of the ball blocks flow completely.

Manual Ball Valve

A manual ball valve is operated by a person turning the handle by hand.

How it works

• Turn the handle 90 to open or close the valve.
• Simple quarter-turn operation.

Advantages

• Low cost
• Easy to install
• No electricity or air supply needed
• Reliable for basic systems

Common uses

• Home plumbing
• Garden irrigation
• Pool systems
• Small industrial setups

Typical look

It has a visible lever handle attached directly to the valve stem.

Common uses

PVC ball valves are widely used in:

• Irrigation systems
• Swimming pools
• Water supply lines
• Chemical handling systems
• Aquariums
• Industrial piping

Main advantages

• Resistant to corrosion and many chemicals
• Lightweight
• Affordable
• Easy to install
• Requires little maintenance
• Quick quarter-turn operation

Typical appearance

A PVC ball valve usually has:

• A plastic body
• Two pipe connection ends
• A lever handle (often red, blue, or gray)

You'll commonly see them in white, gray, or blue PVC piping systems.32MM - VAL - PVC - FEM - ECO - 32

What's in the box
3 X Valve