Pdb Xt60 Power Distribution Board Bec 5V 2A 12V0 5A Xt60 Plug For Fpv
1.The PDB-XT60 has been engineeRed to provide the highest performance and reliability in a 36 x 52mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.The PDB-XT60 offers a Authentic Amass XT60 plug to connect the LiPo pack conveniently.
4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;
5.This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room.
Explanation:
Material: circuit board
Color as shown
Board size: 5.2 cm x 3.6cm x 0.3cm
Board weight: 7.5g (includes 11g) per
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A x 4 or 15A x 6
Peak current (10 seconds/minute): 30A x 4 or 20A x 6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC Mode: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC Mode: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Package Contents:
2 x PDB Board
2 x XT60 Connector
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What's in the box
2 x Pdb Board
2 x Xt60 Connector
