Feature:
1. This transmitter module is compact, easy to install and convenient to use.
2. The silver alloy contacts have good conductivity and quick response.
3. This large area heat dissipation of the transmitter module can run for a longer time.
4. The application scope of the transmitter module is in remote data acquisition and control equipment.
5. The signal input frequency range of this module is 5Hz 500Hz, and the efficiency is fast.
Specification:
Item Type: Transmitter Module
Material: PCB
Power Supply Voltage: 9V ~ 24V
Signal Input Voltage Range: 4 24V
Signal Input Frequency Range: 5Hz 500Hz
Signal Input Duty Ratio Range: 0 100%
Output Voltage: 0.00V 5.00V/0.00V 10.00V
Input Method: J1 Pad On The Circuit Board: The default is open circuit, which has not been used yet.
Output Mode: J2 Pad On The Circuit Board: Open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.
Application Scope: Remote data acquisition and control equipment;
Module Interface:
24V: Power supply positive port (9V ~ 24V)
G: Power ground interface
IN: Signal input positive interface
G: Signal input negative port
OUT: Signal output interface (0.00V 5.00V/0.00V 10.00V)
G: Power ground interface
Output (0.00V 5.00V) Resolution: 0.050V/D (Volt/Duty Cycle)
Output (0.00V 10.00V) Resolution: 0.100V/D (Volt/Duty Cycle)
Calculate The Measured Duty Cycle Method: (output voltage (V)/resolution) = duty cycle (%)
For Example: Output (0.00V ~ 5.00V) output is 2.5V
(2.5(V)/0.05) = 50(%)
Package List:
1 xPWM to Voltage Module
Note:
When the output is 0.00V to 10.00V, the power supply voltage must be 15V.
What's in the box
1 x PWM to Voltage Module
