A self tapping wall anchor which does away with wall plugs of any sort. Pre-drill the work piece with a 6mm HSS bit, put it in place, use a 6mm masonry bit through the pre-drilled hole into normal brick, mortar and insert the screw directly through the part to be fixed into masonry. For harder substrates like lintels and reinforced concrete use 6.5mm SDS drill bit. Granite and similar rock may need a 7.0mm SDS drill bit to be able to turn the screw in all the way. Longer SDS bits are necessary than the usual standard length as the screw alone is 132mm long and ideally the hole is a bit deeper to avoid drill dust blocking the tip. This application method will neither push nor pull your work-piece away or towards the wall therefore it is ideal to fit window and door frames and similar work pieces like kitchen and built-in-cupboards. (Also see our RapidFoam and RapidGun)
To achieve a pulling action on the work piece pre-drill with a standard 8mm HSS bit and the screw will pull any beam flush up against any substrate.
The screw can also be used to tap into structural steel/stainless steel, aluminium and wood. For these applications our extra long 6mm HSS drill bit does the perfect job. Combined with our econo packs of screwdriver bits you are ready for any installation job.
What's in the box
100 x Rasiky Rapid Screw T30 head 7.5x132mm
