Rust-Oleum V2100 System Enamel aerosols are available in high-gloss, semi-gloss, flat, metallic and fluorescent finishes. They apply easily and dry fast to a tough, attractive corrosion-resistant finish featuring superior coverage, colour, and gloss retention and resist chipping, cracking and peeling. They are available in a variety of colours including safety and fluorescent colours, and many match popular Rust-Oleum Industrial Enamel gallon colours for easy touch ups. Not for use on galvanized steel. Primer aerosols are used for maximum corrosion protection on clean, rusted or previously painted metal. Not for use on galvanized steel. They are fast dry, quick recoat rust inhibiting primers designed for use with the V2100 System Enamel aerosols to optimize corrosion control. Galvanizing aerosols are zinc-rich coatings that provide maximum corrosion resistance through galvanic protection. Use for touch-up and repair to damaged galvanized steel; production welds, galvanized ducts, storage tanks, fences, gutters, trucks, trailers, off-shore drilling rigs, utility towers, and more.
High Performance V2100 System Enamel complies with USDA FSIS regulatory sanitation performance standards for food establishment facilities.
Surface preparation
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
Steel: Hand tool (SSPC-SP-2) or power tool (SSPC-SP-3) clean to remove loose rust, mill scale, and deteriorated previous coatings. For best results, use Red Primer on sound rusted or clean metal before the application of a finish coat or intermediate primer.
Previously coated: Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
What's in the box
1 x Rust-Oleum High Performance V2100 Equipment Orange 425g
