Spacecom 50 Ohm Low-loss Coax Cable is ideal where ultra-low loss and a superior performance is required replacing traditional corrugated coax and “RG” cable types. Black outer sheath, 100 metre spool.
Spacecom 50 Ohm Low-loss Coax Cable specifically designed to offer high performance across the bandwidth spectrum offer a real advantage over traditional corrugated cables. The double-sided bonded and flexible braided design allows Spacecom cables to be used throughout the installation, removing the need for jumper cables which are traditionally used to connect corrugated coax cables. With faster termination and reduced risk of kinking, installations can be completed quicker with cost savings on materials and labour.
Antenna cable runs to base stations, Access Points (AP), bridges or CPE
Cabling between any WiFi or WiMax antenna and the associated equipment
Indoor or outdoor use
LMR (Land Mobile Radio) compatible
Local MultiPoint Distribution System (LMDS)
Multi-Channel Multi-Point Distribution Service (MMDS)
Wireless local loop (WLL)
Personal Communication Systems (PCS)
Mobile
Fixed wireless
Ham radio
The following connectors are recommended:
Best suited for BNC, TNC, N, SMB, SMA, SMC and FME.
Specifications:
Centre Conductor 2.74mm Bare copper
Insulation (Dielectric) 7.24mm Foam PE
Shield 1 Bonded Aluminium Foil
Shield 2 144/0.16 TiCCA
Jacket (Sheath) 0/D 6.95mm – PVC – Black
Mechanical Characteristics:
Cable weight (incl spool) 13.3kgs/100m
Max Recommended pulling tension 72.7kg
Minimum Band Radius 25.4mm
Operating Temperture -40° to +80°C
Electrical Characteristics:
Impedance Capacitance 78.4pF/M: 50 ± 1 ? Nom
Attenuation:
Frequency (MHz) 30
dB/100m 2.29
Avg. Power Watts 3300
Velocity of propagation:
Capacitance 78.4pF/M: 85%
Attenuation: Frequency (MHz) 50dB/100m 2.89
Avg. Power Watts 2600
Conductor DCR:
Capacitance 78.4pF/M: 4.60 Ohms/km
Attenuation: Frequency (MHz) 150dB/100m 4.95
Avg. Power Watts 1500
Shield DCR:
Capacitance 78.4pF/M: 5.40 Ohms/km
Attenuation: Frequency (MHz) 220dB/100m 6.14
Avg. Power Watts 1200
Nom. Inductance:
Capacitance 78.4pF/M: 0.20 uH/m
Attenuation: Frequency (MHz) 450dB/100m 8.60
Avg. Power Watts 830
Peak Power:
Capacitance 78.4pF/M: 16kW
Attenuation: Frequency (MHz) 900dB/100m 12.83
Avg. Power Watts 580
Nominal Delay:
Capacitance 78.4pF/M: 5.05ns/mtr
Attenuation: Frequency (MHz) 1500dB/100m 16.86
Avg. Power Watts 440
Maximum Operating Voltage:
Capacitance 78.4pF/M: 2500 v RMS
Attenuation: Frequency (MHz) 1800dB/100m 18.57
Avg. Power Watts 400
Cut off Frequency:
Capacitance 78.4pF/M: 16.2GHz
Attenuation: Frequency (MHz) 2000dB/100m 19.65
Avg. Power Watts 370
Return Loss (820-960MHz):
Capacitance 78.4pF/M: 20 dB
Attenuation: Frequency (MHz) 2500dB/100m 22.28
Avg. Power Watts 330
Return Loss (17000-2200MHz):
Capacitance 78.4pF/M 20 dB
What's in the box
1x 100m Roll of Cable
