The Ubiquiti UniFi Access Reader UA-G2 empowers employees with a wide variety of unlock options suitable for any weather conditions. Key FeaturesUnlock using an NFC card or UniFi Identity mobile app Additional handwave unlock functionality Entry and exit greeting messages Connects to UniFi Access Hub using PoE IP55 weather resistance (-30 to 45 C)

SPECIFICATIONS

General

Product type: Bluetooth/NFC proximity access reader for UniFi Access systems.
Compatibility: Works with UniFi Access Hub / controller via PoE.

Power & Connectivity

Power method: 802.3af PoE (Powered over Ethernet via UniFi Access Hub).
Ethernet: 1 × 10/100 Mbps RJ45 port.
Bluetooth: BLE 4.1 for mobile-based access with the UniFi Identity app.

NFC & Access Tech

NFC frequency: 13.56 MHz.
NFC read range: < 30 mm (typical proximity).
Supported NFC standards: ISO 14443A, ISO 14443B, ISO 15693.
NFC tag support: NFC Tag 1-5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire credentials can be read.

Features

Hand-wave unlocking and entry/exit greeting messages.
Integrated speaker, RGB LED indicators, and a reset button.
Proximity sensor included for presence detection.

Physical & Environmental

Dimensions: 93 × 40 × 36.5 mm
Weight: 82 g
Material: Polycarbonate and glass enclosure.
Weather resistance: IP55 rating for dust/water protection - suitable for indoor or sheltered outdoor installations.
Operating temp/humidity: roughly -30 C to 45 C and 5-90 % non-condensing.

Power Consumption & Safety

Power draw: 5 W when active.
ESD/EMP protection: Typical 15 kV air / 8 kV contact.

Software & Integration

Managed through the UniFi Access controller app (supporting the latest UniFi Access firmware).
Supports unlocking with UniFi Identity mobile app on Android and iOS.

What's in the box
1 x Ubiquiti UniFi Access Reader G2
1 x Mounting Kit
1 x User Manual