Features:
- simultaneous testing of 2 injectors this fuel injector cleaner and tester helps you diagnose and clean injectors, easily identifying common faults such as stuck, clogged, leaking, or burnt-out fuel injectors. Compared to other fuel injector cleaners and testers that only have one pair of pulse output terminals (black and red test leads), our fuel injector tester has two pulse output terminals (two pairs of test leads), allowing you to test two fuel injectors simultaneously for comparison.
- 8 pulse modes, mode lock function, and lcd display the fuel injector tester kit features an lcd display and 8 pulse modes, consisting of 4 pulse signal output modes and 2 output voltage levels: short/medium/long/continuous pulse modes + high/low (12v/5v) power drive modes. This fuel injector cleaner helps you identify good and bad injectors when the engine is off. You can select any mode as needed. Its mode lock function ensures consistent testing conditions.
- 4 size adapters and wide compatibility our injector cleaner is compatible with almost all 12v injectors in most car models, suitable for efi and gdi injectors. It comes with one large and one small universal adapter for most injector models (except audi and bmw), so we added two more adapters to expand its compatibility: a medium-sized adapter for audi, volkswagen, etc., and a special adapter with threaded holes for bmw n series, such as n14/n18/n20/n26/n53/n54/n55/n63/s63.
- 40-inch power cord and 20-inch test leads the power cord is up to 40 inches/100 cm long, and the test leads are 20 inches, making it easy to connect and use. The wires are made of high-quality silicone for better high and low-temperature resistance. The fuel injector cleaning kit is powered by a 12v battery or an external dc 12v (at least 1.5a recommended) power adapter. It can operate when the engine is off and is compatible with any fuel pressure tester (note: for gasoline vehicles only, not suitable for diesel engines).
- reverse polarity and short circuit protection this fuel injector cleaner and tester features reverse polarity protection for the power input and short circuit protection for the output. If the fuel injector is damaged or the pulse output terminal is short-circuited, the power indicator light on the fuel injector cleaning tool will flash to alert you.
8 pulse modes (mode 1 - mode 8)
Mode 0: standby, no output
Mode 1 / mode 5, single pulse low power/high power: the injector tester will emit a pulse with an approximate pulse width of 255 ms.
Mode 2 / mode 6, short pulse low power/high power: the injector tester will emit 50 pulses with a pulse width of approximately 7 ms.
Mode 3 / mode 7, long pulse low power/high power: the injector tester will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.
Mode 4/mode 8, continuous pulse low power/high power : the injector tester will continuously output pulses at a rate of approximately 50 pulses every 1450 ms with a pulse width of approximately 7 ms.
Note: during pulse output, the mode set button is locked, please press the pulse button again to terminate output and then the mode set button is unlocked, and you can set the mode again.
What's in the box
1 x Fuel Injector Tester
1 x Power Clamps
1 x Injector Tester
4 x Cleaning Adapters
1 x Storage Bag
1 x User Manual
1 x Working Gloves
1 x Leak Proof Tape
