Waterfall Flow Pumps produces super large flow, ideal for moving large volumes of water through filtration systems or creating a stream or waterfall and is suitable for both submersible pond and in-line on land use. The vortex impeller is efficient & energy saving. The ceramic bearing & shaft provides longer pump life-span with better corrosion resistance. The simple 'no-tool' clip together design makes it easy to disassemble / assemble the inlet housing cover quickly & conveniently.

Built-in thermal overload switch has a self-resetting feature to ensure safe operation of the pump, even in strenuous conditions. The unique outer housing design alleviates blockages and the pump has a built-in filter. The pump also has an adjustable flow control feature to allow less water than the maximum to be pumped, should this be required.

For in-line on land use, disassemble the inlet housing and fit the supplied threaded fitting to the pump inlet. The pump Does Not have suction / lift capability which means it needs to be installed below the level of the water and then flooded for it to be used in in-line on land mode.

Features:
- Continuous Duty
- Salt & Fresh Water
- Koi & Pond Safe
- Adjustable Flow Rate
- Built in Filter
- Suitable for both Indoor & Outdoor Use
- Eco-design motor set to run at maximum efficiency
- Long Life Vortex Impeller
- Thermal Overload Protection

Max Head / Water Cut-Off Height is at 4.0m. Please refer to the supplied Height / Flow Chart to determine the flow capabilities of the pump.

Specifications:
- Voltage: 220 - 240 V at 50Hz
- Power: 90W
- Max Head / Water Cut-Off Height: 4.0m
- Cable Type: 3-Core Outdoor Insulated Cable
- Cable Length: 10.0m

What's in the box
1x Waterfall Flow Pump
3x Fittings