10 Sheet DIY Mosaic Tile Peel and Stick Backsplash 2.5mm-Arrow Marble White

Easy install
– Do it yourself – Enjoy the fun
– Just peel, interlock and stick
– Easy to cut with sharp utility knife
– No Grout/ No Mess up /Save your money

Specifications
– Material: Vinyl
– Unit size: 30.5×30.5cm
– Thickness: About 2.5 mm
– Unit weight: 108g / Sheet

Waterproof & Heat Resistant: Widely used in kitchen island walls, bathroom backsplash, shower, fireplace, and installed behind the stove
Stronger Upgrade Adhesive: 3X Stronger backing glue than ordinary vinyl backsplash tile, not only stick firmly to the smooth & clean surface, but also available on lightly textured wall

Installation guide:
– Tools needed: scissors, carpet knife (excluded)
– Before cutting, please measure the detailed dimensions of the wall
– Clean the surface to dust-free before apply
– Cut to the appropriate size according to the decorative area
– Peel off the back sheet and stick it on a flat surface
– Press down on the panel to make sure it is properly connected to the wall

Recommended Surface
Smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained gypsum, wall linoleum, stainless metal, mirror, laminate.

Non-Recommended Surface
oily wall, brick wall, stucco wall, stone wall, unfinished wall (gypsum or plaster), unpainted plywood, Wet wall

Note:
– Due to different lighting and screen settings, the color of the item may differ slightly from the picture
– Manual measurement, please allow slight difference in dimensions
-Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight colour difference.

What’s in the box
10 Sheets