12 v/15 a Electric Pump for Inflatable Sup and Kayaks

Our team of enthusiasts recommend this product to easily and quickly inflate your inflatable stand-up paddle boards to high pressures of up to 15 psi

BENEFITS

EASE OF USE
Set the pressure, start the pump.

PARAMETER MEASUREMENT
Built-in 0-15 psi pressure gauge.

LIGHTWEIGHT
Weight: 1.2 kg.

POWER
Inflates a 300 L SUP to 15 PSI in approximately 12 minutes.

MODULARITY
Has 1 Boston fitting, 1 mini-Boston fitting and 1 high-pressure fitting.

TECHNICAL INFORMATION

CONNECTION
Works plugged into a 12V cigarette lighter socket.
WARNING: The car battery must provide at minimum 15A.

Provides pressure of up to 15 PSI (1 bar).
Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).

SAFETY CONTROL
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.

OPERATION
1/ Connect the pump to the cigar lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Start Press ON to inflate.
The pump stops at the set pressure.

TIPS FOR STORAGE AND MAINTENANCE

STORAGE TIPS
Store in a dry place. Avoid dust and sand.

RESTRICTIONS ON USE
Inflate to the pressure recommended by the manufacturer.

TESTS AND WARRANTY

WARRANTY
2 Years

PARTS GUARANTEE
Warranty: 2 years

What’s in the box
1 x Pump with attached power cable
1 x Pipe
3 x Adapters
1 x Mesh carry bag