Digital Satellite Finder Meter with LCD Display & with Compass

FEATURES:
LCD display
DC pass to LNB
In-line IF signal strength meter
Button operation

IMPORTANT NOTES:
To avoid a continuous full-scale reading, do not use the Satellite Finder directly in front of the dish.
When using a LNB with a gain higher than 60dB inserts a 5dB attenuator between the LNB/LNBF and the Satellite Finder.
The Satellite Finder has optional 4LED on the front panel indicating:
A) LED marked with 22KHz: The receiver is sending a 22KHz signal, used to switch some LNB to the high band frequency.
B) LED marked with 0Hz: The receiver does not send the 22KHz signal.
C) LED marked with 13V: Indicating the satellite receiver is switching 13V power to switch the LNB’s vertical polarization.
D) LED marked with 18V: Indicating the satellite receiver is switching 18V power to switch the LNB’s horizontal polarization.

Frequency Range: 950MHz ~ 2150MHz
Input level range: -40dBm ~ -10dBm
Input impedance: 75Ohms
Supply Voltage: 13-18V DC
Operating temperature: 0 C ~ +40 C

What’s in the box
1x Satellite Finder meter