G+ 8800mAh POE UPS for WIFI Router/Fiber/CCTV/Phone Backup Supply Battery

Description
Are you still struggling with load shedding?
No WIFI/ Cell phone battery is dead/ CCTV out of service / FingerPrint device out of service?

This G+ UPS with high-capacity lithium battery will solve your problems. It will keep multiple of 5V/9V/12V devices powered and running during load shedding, it will automatically switch to battery power, and your device will stay on without any interruption.

Features:
Zero Interrupt: During load shedding, the UPS will automatically switch to battery power, and your device will stay on without any interruption.
Overload & short circuit protection: with overload and short circuit protection
Over charge and over discharge protection
LED Status Indicator: You will see the battery level clearly.
Wide application: routers, modems, cordless phones, CCTV, time recorders, network cameras, fingerprint device.
Multi-voltage output: It can provide backup power for 5V/9V/12V/24V/48V devices.
Charge your phone: The USB port provides 5V output, allowing you to charge your phone.
POE Support: Use network cables to easily transfer data and power your phones, cameras and other devices.
Large capacity battery: 29.6WH/8800mAh lithium battery. Long battery life will meet your various usage needs.
Wide Input Voltage Range: The built-in adapter allows a wide AC voltage range of 100~250V.

Specifications:
-Input Charger is local charger

-Rated working voltage: 100-240VAC/50-60Hz

-Output Power (Max) 14W

-Output – 1 USB Interface / 2 DC Interface / 2 POE Interface

-Output voltage – USB 5V -DC 9V/12V – POE 24V/48V

-Output power and current (in common) – USB 2A/5V – DC 1A/12V 1A/9V POE 0.6A/24V 0.6A/48V

-QTY & Capacity of battery – 2200 x 4=8800 high-capacity Lithium Battery

-5/9/12v dual DC socket output for most devices

-5V USB output for charging phones and similar devices

-Typical connections: Both router + fiber ONT devices
Precautions of use:
You must check the nominal operating voltage, current and polarity of the device, then select the port voltage as the corresponding load voltage, and finally connect the device.If you want to supply power to the device with 12V + 9V at same time, it’s better the total current of the two devices is less than 2A. Actual test results of power supply duration is as follows:
1.Power the 12V 1A + 9V 1A equipment at same time, respectively connected to 12V and 9V DC port, supply for 4~6 hours (Recommended)
2.Power the 12V 1A + 12V 1A equipment at same time, respectively connected to 12V and 9V DC port, supply for about 4 hours

What’s in the box
1 x Mini DC/POE UPS 5/9/12V 8800 mAh
1 x Manual
2 x DC Cable
1 x USB Cable
1 x Exquisite packaging bag