Huawei 4G Router 2 Pro B612-233

The HUAWEI LTE CPE B612-233 is a Long Term Evolution (LTE) wireless gateway for multiple users in household or small office environments. It enables users to access the Internet.
The B612-233 supports 3GPP Release 11 with LTE.
 
The supported service functions are as follows:
– Data service up to DL 300 Mbps and UL 50 Mbps
– Working band: LTE: B1/B3/B7/B8/B20/B38/B40/B41(2545~2655MHz)/B42/B43, Because B40 2381.5MHz~2400MHz is close to Wi-Fi frequency, it has coexistence interference with Wi-Fi. When the terminal works in this frequency band, the performance of Wi-Fi will decrease.
– DC-HSPA+/HSPA+/HSPA/WCDMA: B1/B8
– EDGE/GPRS/GSM: B2/B3/B5/B8
– 4*4 MIMO?B3/B7/B20/B38/B40/B41/B42/B43
– Wi-Fi: 802.11 b/g/n. 2.4GHz Wi-Fi 2×2 MIMO up to 300Mbps, Maximum Users: 32
– 1 port for LAN/WAN, 3 ports for LAN
– IPv4 /IPv6 dual stack
– SMS
– Built-in DHCP Server, DNS RELAY and NAT
– VPN client service (L2TP, PPTP)
– Customer management via WebUI or HUAWEI SmartHome App (iOS or Android)
– Huawei Firmware Over the Air (HOTA)
 
Huawei Firmware Over the Air (HOTA)
Data Services
The B612-233 can access the Internet through mobile networks and Ethernet networks. By connecting to the B612-233 using Wi-Fi or a network cable, users can obtain access to high-speed Internet services and establish a local area network (LAN).
The B612-233 can access the Internet through mobile networks.
The B612-233’s LAN/WAN port can be connected to a wall-mounted Ethernet port using a network cable.
Voice Services
The B612-233 provides one telephone port that can be connected to telephones for calling.
SMS
The B612-233 supports message writing/sending/receiving and group sending (up to 50 -contacts at a time).
Security Service
The B612-233 supports comprehensive and robust security services. It provides a firewall function and PIN protection mechanisms. These features allow users to connect their computers to the Internet and simultaneously protect their computers against security threats from the Internet.
Firewall Service
The B612-233 supports the enabling or disabling of a firewall on the network connection, which protects the device and network from attacks by hackers on the Internet and controls access to the Internet.
MAC Filtering
The B612-233 supports configuration of the Media Access Control (MAC) address to restrict network access.
Wi-Fi Authentication
The gateway supports the following user authentication protocols for Wi-Fi:
No encryption
WEP, WPA2-PSK (AES), WPA/WPA2-PSK (TKIP/AES)
VPN Function
VPN Client
VPN tunneling involves establishing and maintaining a logical network connection (that may contain intermediate hops). On this connection, packets constructed in a specific VPN protocol format are first encapsulated within some other base or carrier protocol, then transmitted between the VPN client and server, and finally decapsulated on the receiving side.
The B612-233 supports L2TP and PPTP tunneling protocols.
VPN Pass-Through
The B612-233 supports L2TP/PPTP VPN pass-through for the LAN side device. The LAN side device can create a VPN tunnel to the VPN server.
Multi-APN
The B612-233 supports the establishment and maintenance of two APNs. These two APN connections isolate data and remote management services on an operator’s network.
The B612-233 supports an independent APN for CPE internal/TR-069.
HiLink
Supports HUAWEI HiLink devices to connect to B612-233 through the WPS button
to create an expanded network.
Supports quick connection between a HiLink device (such as Honor set-up boxes
and Honor handsets running on EMUI 5.0 and later) and B612-233 through the
WPS button.
Customer management
WebUI
The B612-233 supports local configuration through the Web UI. You can perform device management and network configuration to ensure normal and stable performance.
HUAWEI SmartHome App
Scan the QR code (can be found in the Quick Start Guide, giftbox and Web UI) to download the Huawei SmartHome App and configure the router from your phone.
Operator maintenance
The B612-233 supports Operator maintenance through the TR-069.
Operator remote manages the CPE software update/parameters configuration via
 TR-069
 
HOTA
The B612-233 supports the HOTA feature, which allows users to remotely update the device firmware through the HOTA server.
 
Hardware Specifications
Technical standard
WAN: LTE/DC-HSPA+/HSPA+/HSPA/UMTS/EDGE/GPRS/GSM
LAN: IEEE 802.3/802.3u
Wi-Fi: IEEE 802.11b/g/n
 
Working band/frequency
LTE: B1/B3/B7/B8/B20/B38/B40/B41(2545~2655MHz)/B42/B43
DC-HSPA+/HSPA+/HSPA/UMTS: B1/B8
EDGE/GPRS/GSM: B2/B3/B5/B8
4*4 MIMO: B3/B7/B20/B38/B40/B41/B42/B43
Wi-Fi: 2.4 GHz: 2422MHz-2483.5MHz
 
External port:
One power adapter port
three LAN ports (RJ45)
One LAN/WAN port (RJ45)
One phone port (RJ11)
Two external LTE antenna ports (SMA)
One SIM card slot (micro-SIM)
 
Antennas:
Built-in LTE/UMTS primary antenna
Built-in LTE/UMTS secondary antenna
Built-in Wi-Fi 2.4 GHz antenna
 
LED Indicators
– One Power indicator
– One LAN/WAN indicator
– One group of signal strength indicators
– One Wi-Fi indicator
Flash slowly: A pairable HiLink device is detected.  
Flash quickly: HiLink pairing is in progress. 
Off: Wi-Fi is disabled.
NOTE: 
The indicator starts to flash slowly only when B612-233 detects a new HiLink device. 
HiLink devices include Honor routers, Honor set-up boxes, Honor handsets/ HUAWEI handsets (EMUI 5.0 and later), and more. 
– One Internet status indicator 
Cyan: LTE network accessed 
Blue: UMTS network accessed 
Yellow: GSM network accessed 
Green: Ethernet network accessed
Red: No SIM card is inserted or detected, or the SIM card has insufficient balance
 
Buttons
– One Power ON/OFF switch
– One WPS button 
The Wi-Fi indicator flashes slowly when the router detects a HiLink device. Press the WPS button to connect the HiLink device to the router’s Wi-Fi.
When the Wi-Fi indicator is steady on, press the WPS button to enable WPS.
– One Reset button
 
Power consumption
– < 12 W
AC/DC power supply
– AC (input): 100V-240V
– DC (output): 12V/1A
 
Dimensions (Maximum)
– 240mm × 155mm × 78mm
 
Weight
– About 440 g (excluding the power adapter)
 
Temperature
– Working temperature: 0°C to 40°C
– Storage temperature: -20°C to +70°C
 
Humidity
– 5% – 95% (non-condensing)
 
Antenna Specifications
Build-in LTE Antenna
LTE antenna specifications
– Frequency: 703MHz~960MHz/758MHz~960MHz/1710MHz~2690MHz/
3400~3800MHz
– Input impedance: 50 ?
– Standing wave ratio: < 3
 
Main antenna efficiency
– ? -4dB@824MHz~960MHz
– ? -3.5dB@1710MHz~2690MHz/3400~3800MHz
 
Diversity antenna efficiency
– ? -4dB@824MHz~960MHz
– ? -3.5dB@1710MHz~2690MHz/3400~3800MHz
 
antenna gain
– Band 42/43: 4-5 dBi 
– Band 1/3/7/38/40/41: 3-4 dBi
– Band 8/20: 1-2 dBi
 
TX/RX
– 1T2R: B1/B8
– 1T4R: B3/B7/B20/B38/B40/B41/B42/B43
 
Build-in Wi-Fi Antenna
Wi-Fi 2.4 GHz antenna specifications
Frequency: 2.4 GHz?2.495 GHz
Input impedance: 50 ?
Standing wave ratio: < 2
Efficiency: ? -3 dB
Gain: ? 2.6 dBi
Polarization: Linear polarization
 
Software specifications
LTE features
– DL 4×4 MIMO
– DL 64QAM, UL 16QAM
 
Mobile network
– APN management
– APN auto adapter
 
Gateway
Router
– Supports the default route: 0.0.0.0.
– Supports the default gateway address:  192.168.8.1.
– Supports the Address Resolution Protocol (ARP).
– Supports the Internet Control Message Protocol (ICMP).
– Supports the domain name service (DNS).
 
DHCP server
– Enables and disables the DHCP server.
– Configures DHCP server address pools.
– Sets the lease time.
 
NAT
– Supports NAT and Network Address and Port Translation (NAPT), which complies with RFC2663, RFC3022, and RFC3027.
– Supports cone NAT.
– Supports fragmented message identification during common NAT.
 
ARP
ICMP
IPv4v6 dual stack
IPv6 only (Optional, CLAT for LAN side IPv4 device access Internet)
IPv4 only (Optional)
NOTE:
When the CLAT function is enabled, the IPv4 device Internet access service cannot reach the maximum throughput. Under IPv6 only, NAT-base service (such as port forwarding and port triggering) is not available.
 
VPN pass-through
VPN client
Support L2TP VPN client (When L2TP VPN client function is enabled, the throughput performance will slow down, the maximum speed can up to 50Mbps (dependent on network environment).)
SMS
– Writing/sending/receiving
– Writing/sending/receiving extra-long messages
 
Voice
VoIP
– Supports the Session Initiation Protocol (SIP).
– Supports G.711a/G.711u/G.726 (-24/-32)/G.722/G.729 for encoding and decoding.
 
CS voice
– Supports CS voice communication over UMTS and GSM networks.
– Supports the circuit switched fallback (CSFB).
 
VoLTE
– Customizable function
 
Data service
LTE: DL 300 Mbps, UL 50 Mbps
DC-HSPA+: DL 42 Mbps, UL 5.76 Mbps
HSPA+: DL 21 Mbps (64QAM) / 28 Mbit/s (MIMO), UL 5.76 Mbps
HSPA: DL 14.4 Mbps, UL 5.76 Mbps
WCDMA PS: DL 384 Kbps, UL 384 Kbps
Wi-Fi 802.11b/g/n/
Supports multi APNs (Optional, one for data and one for TR-069).
 
Firewall setup
– Firewall enable/disable
– LAN MAC addresses filtering
– LAN IP filtering
– URLs filtering
– DMZ service
– UPnP service
– ALG settings
 
LAN
– 10/100/1000 Mbps auto-negotiation 
– MDI/MDIX auto-sensing
– IEEE 802.3/802.3u-compatible
 
Wi-Fi
Broadcasts and hides service set identifiers (SSIDs)
Complies with IEEE 802.11b/g/n
WPS:
Encryption
WEP, AES, and TKIP + AES
Security mode
– Open
– WPA2-PSK
– WPA/WPA2-PSK
– WEP
 
MAC address authentication
– Supports the MAC address authentication whitelist.
– Supports the MAC address authentication blacklist.
– Supports a maximum of 32 MAC address entries.
 
STA
– Supports inquiry of STA status.
– Supports a maximum of 32 connected stations.
 
Operator maintenance
(Optional)
– Supports TR-069 Amendment III
– Supports TR-143 Amendment I
 
USIM
PIN management and USIM card authentication
 
NTP
Supports daylight saving time (DST) (Optional).
 
Maintenance
Supports export of current diagnosis results and operation logs.
 
HUAWEI SmartHome App
– View data traffic usage and SMS.
– Manage connected devices.
– Change CPE’s SSID and password.
 
Web browser
– Microsoft Internet Explorer 8.0 with latest updates.
– FireFox 49.0 with latest updates.
– All major versions of Chrome in the last year (53.0 with latest updates).
– Safari 10.0 with latest updates (MAC OS).

What’s in the box
1 x Router
1 x Quick Start Guide
1 x Cable