HydroSeal – Cement Sealant Waterproofing -101 uses: Koi Ponds, Walls – 25kg – Charcoal

Introducing Hydro seal's Hydro Sealant. This is a two-part waterproofing system incorporating a blend of cementitious powders combined with proprietary activating chemicals and high-grade quality aggregate fillers. It is designed for concrete, cementitious, and masonry substrates.

This is a versatile product that can be used on various interior and exterior surfaces.

Key Benefits:

– Cost Effective

– Set within minutes

– Pre-blended for consistency

– Available in two formulations for different needs

– Blocks water passages by sealing pores

– Can be applied on damp surfaces or green concrete

– Non-toxic and safe for use.

– Non-tainting mixing

101 uses:

– Sealant, Filler, Plaster, Paint

– Koi ponds

– Rising damp

– Sewer tanks

– Manholes

– Reservoirs

– Farm Dams

– Precast walls

– Newly plastered walls

– Parapet walls

– Balconies

– Roof tiles

– Coating stained marble plastered pools

– Repairing marble plaster

– Rock art crack filler

– Plinth – Dampness

– Concrete garden accessories – Garden furniture, plant holder, lamps etc.

Mixing Instructions:

IMPORTANT TO NOTE: Before you add any liquid, mix the dry ingredients properly to ensure that the active ingredients are distributed evenly. Suggested to use the Promix paint mixer

25kg Powder to 3 liter Bonding Agent to 6 liter Water

• Combine components in a suitable container, stir continuously to form a thick slurry.
• Allow the mixture to stand for 2 minutes to activate chemicals, then stir again before application.
• Apply on pre-saturated surfaces, ensuring coverage of at least 1.5kg per m per coat.
• Apply coats perpendicular to each other; allow 12 hours curing time between coats.
• Stir occasionally during application to prevent settling.
• Apply on pre-saturated surfaces, ensuring coverage of at least 1kg per m2 on 1st Coat and 1/2kg per m2 on 2nd coat

Special Instructions:

– Ensure surfaces are pre-saturated with clean water before application.

– Avoid applying over pooled or running water; use a sponge to damp down if necessary.

– Wash pool, pond, dam or any other water containing unit with clean water & soft brush or broom after 12 Hours of last & final coat. Remove

unsaturated powders if any with a sponge. Be careful not to drag feet or object over surface. Then fill with water.

– Allow adequate curing time before introducing chemicals or fish into water-containing units.

– These instructions provide a comprehensive guide for effectively applying Hydro Sealant to achieve waterproofing and structural integrity in various

applications.

• Factory warranty

What’s in the box
1 x 25 kg Hydro Sealant Waterproofing