HydroSeal – Hydro Sealant Swimming Pool – Marble Waterproofing – 25kg – Marble Blue

Introducing HydroSeal's, Hydro Sealant Marble formulated for waterproofing swimming pools. Hydro Sealant Marble is an excellent choice for waterproofing swimming pools due to its effective sealing properties, chemical resistance, ease of application, and long-term durability. It offers peace of mind by ensuring that your swimming pool remains leak-free and structurally sound, maintaining water quality and extending the lifespan of the pool structure.

Swimming pools are exposed to various chemicals such as chlorine and pool cleaning agents. Hydro Sealant is designed to withstand these chemicals without degrading, ensuring long-term protection against water and chemical ingress.

Key Benefits:

– Cost Effective

– Set within minutes

– Easy to apply

– It can be applied to damp surfaces or green concrete, which is beneficial during pool construction or renovation when surfaces may not be completely

dry.

– The product can be applied using a brush or roller, making it straightforward to apply in the intricate areas of a swimming pool structure.

– It is non-toxic and non-tainting, ensuring that it does not pose any health risks to swimmers or affect the water quality in the pool.

– Once applied and cured, Hydro Sealant becomes an integral part of the concrete structure, providing long-lasting protection. This reduces the need for

frequent maintenance and repairs associated with water leakage issues.

– Ensures that the walls of the pool remain watertight, preventing water from seeping through and causing damage.

– Provides a seamless waterproofing layer to the pool floor, protecting it from water penetration and potential structural damage.

– Waterproofing around tile joints, drains, and other fixtures in and around the pool area.

Mixing Instructions:

IMPORTANT TO NOTE: Before you add any liquid, mix the dry ingredients properly to ensure that the active ingredients are distributed evenly. Suggested to use the Promix paint mixer

25kg Powder to 3 liter Bonding Agent to 6 liter Water

• Combine components in a suitable container, stir continuously to form a thick slurry.
• Allow the mixture to stand for 2 minutes to activate chemicals, then stir again before application.
• Apply on pre-saturated surfaces, ensuring coverage of at least 1.5kg per m for 2 coats.
• Apply coats perpendicular to each other; allow 12 hours curing time between coats.
• Stir occasionally during application to prevent settling.

-Factory Warranty

What’s in the box
1 x 25kg bucket Hydro Sealant Marble