HyperX FURY RGB 8GB DDR4-3600 CL17 RGB DIMM

HyperX FURY DDR4 RGB
Unleash your style. Unleash your FURY.

HyperX FURY DDR4 RGB delivers a boost of performance and style with speeds of up to 3733MHz, aggressive styling, and RGB lighting that runs the length of the module for smooth and stunning effects. This dazzling, cost-effective upgrade is available in 2400MHz–3733MHz speeds, CL15–19 latencies, single module capacities of 8GB–32GB, and kit capacities of 16GB–128GB. It features Plug N Play automatic overclocking at 2400MHz and 2666MHz speeds and is both Intel XMP-ready and Ready for Ryzen. HyperX FURY DDR4 RGB stays cool with its stylish, low-profile heat spreader. 100% tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system.

Stunning RGB lighting with aggressive style
Patented HyperX Infrared Sync Technology
Intel XMP-ready
Ready for AMD Ryzen
Speeds up to 3733MHz and kit capacities up to 128GB
Plug N Play functionality at 2400MHz and 2666MHz
Component for: PC/server
Internal memory: 8 GB

Lighting customizable with HyperX NGenuity 2 software or with motherboard RGB control software. RGB customization support through third-party software may vary.
HyperX Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. HyperX Plug N Play DDR4 products support XMP 2.0 specifications so overclocking can also be achieved by enabling the built-in XMP Profile.

HyperX HX436C17FB3A/8 is a 1G x 64-bit (8GB) DDR4-3600 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-3600 at a low latency timing of 17-21-21 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Specifications
CL(IDD) : 17 cycles
Row Cycle Time (tRCmin) : 45.75ns(min.)
Refresh to Active/Refresh : 350ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) : 32ns(min.)
UL Rating : 94 V – 0
Operating Temperature : 0 C to +70 C
Storage Temperature : -40 C to +85 C

Features
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.624” (41.24mm), w/heatsink

What’s in the box
1 x Warranty and Installation Guide
1 x 8GB HyperX RGB Ram Module DDR4-3600Mhz