Infineon (IR2233JPBF) MOSFET Driver 3 Phase, High Side & Low Side

MOSFET Driver 3 Phase, High Side & Low Side, 10V-20V supply, 500mA peak out, 70 Ohm output, LCC-44

Product Overview
The IR2233JPBF is a high voltage high speed power MOSFET and IGBT Bridge Driver with three independent high-side and low-side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. An independent operational amplifier provides an analogue feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs can also be derived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or under-voltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high-side configuration which operates up to 600 or 1200V.

Floating channel designed for bootstrap operation
Tolerant to negative transient voltage (dV/dt immune)
Under-voltage lockout for all channels
Overcurrent shutdown turns OFF all six drivers
Independent 3 half-bridge drivers
Matched propagation delay for all channels
2.5V Logic compatible
Outputs out of phase with inputs

Applications
Industrial, Signal Processing

Product Information

No. of Channels: 6Channels
Driver Configuration: 3 Phase Bridge
Power Switch Type: MOSFET
Supply Voltage Min: 10V
Supply Voltage Max: 20V
Driver Case Style: LCC
Input Type: Inverting
IC Case / Package: PLCC
No. of Pins: 44Pins
Source Current: 250mA
Input Delay: 750ns
Output Delay: 700ns
Sink Current: 500mA
Operating Temperature Min: -40°C
Operating Temperature Max: 125°C
MSL: MSL 3 – 168 hours

What’s in the box
1 x MOSFET Driver 3 Phase