Loba Invisible Protect – 2 Comp Water-based Ultra Matt Varnish

New-generation, water-based surface protection for parquet and
hardwood floors. For extremely heavy wear. The natural look and
feel of the untreated wood is maintained. The virtually invisible
layer is also extremely scratch-resistant thanks to the use of the
highest-quality raw materials. Elastic, excellent chemical and
abrasion resistance.
– Natural structure and feel like untreated wooden flooring
– 2-coat system without primer
– Very low emission, certified to EMICODE EC1 R Plus
– Certified anti-slip properties as per DIN 51130 for work areas
– No polishing effect
– Excellent chemical resistance
– As easy to clean as finished surfaces
– No grain accentuation, the original color of the wood remains as it was in its original state

Range of use:

Suitable for parquet, wood and cork floors. Anti-slip as per DIN 51130 evaluation group R9.

Application

Shake product, add hardener to base at a ratio of 10 : 1 and then shake to mix. For mixing smaller quantities, use the
LOBATOOL Mixing Container or a scale to weigh out the components. Usable up to 2 hours after mixing.
– The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone,
sanding dust and other impurities.
– The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel.
humidity 40% – 65%, material temperature +18°C – + 25°C, max. wood moisture 12%, sufficiently ventilate working
rooms.
– In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.
– Transfer material to a LOBATOOL varnish bucket before applying.
– Shake the contents well.
– Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.
– This product is part of the LOBA and Wakol “Connected Systems”. The approved combinations with Wakol parquet
adhesives may be found in the “Connected Systems” Matrix: www.loba.de/connected-systems

Thinner / Mixing

The product is ready for use and must not be reduced!

Application tool / application rate

LOBATOOL roller Deluxe 120 / 110-130 ml(g)/m2 = 8-9 m2/l (kg)
Intermediate sanding

Able to recoat without intermediate sanding within the first 24 hours. After this time, an intermediate sanding is necessary.

An intermediate sanding before the last application will improve the optical appearance of the surface. Use LOBASAND
perforated pad P180 or finer, alternatively Sanding Net P180 or finer. Carefully remove dust before overcoating.
Drying time
– Can be carefully walked on, intermediate sanding can be performed and can be varnished over after no less than 4
hours.
– Light use after 24 hours.
– Full use and covering possible after 5 days.
– The floor can be covered earlier by using LOBATOOL Cover 400, for details see the TI for the product.
– Drying times are valid for +20°C and 50% relative humidity.

What’s in the box
1 x Loba White Plastic 4.55kg container.
1 x .45kg Loba Tin Hardener. Instructions on the label in various languages.