Mini Electric Chainsaw 24w

Installation instructions
L When instaling the guide plate, pay atention that the direction of the knfe edge on the chain is consistent with the direction of the knife edge shown on the guide plate cover plate.2 nstallthe chain into the sprocket. and insta the guide plate adjusting elastic pin into tha guido pirterale
3. insta!! the guide plate gland. instal the mut and keep it tight, and use a slotted screwdriver to adjust the lightness screw of
the gulde plate. Keep the chain slightly tight. Note. the chain should not be too tigh,and then lock the guide plate gland nut.After the first installation or use, the chain
will become loose. After loosening. repeat the above steps
4. Finally tighten the guide plate c
General safety rules
Waming!
Read the instructions
1) Workplace electric tools can ignite dust or gas. Kkeep the workplace clean and bright. Chaotic and dark venues can cause accidents Let children and bystanders operate the power tools after negotiation. The outside mind will relax your control b) do not eperate electnic too n xplosve erronment,such asfammable iquid. gas or dust sparks generated by
2) Electrical satety increase the risk of electric shock. a) The power tool plug must match the socket. Never modify the plug in any way. Do not capose power tocls to rain or humidity. Water entering electric tools wil increase the risk of electric shock bl Avold human contact with grounding surfaces,such as plpes,fins and refrigerators.If your bodyis grounded, it will
the risk of electric shock. edges or moving parts. Danaged or twisted wires can increase the risk of electric shock. e) When using electric tools outdoors, use external wires sultable for outdoor use. Wires suitable for outdoor use will reduce an Do not abuse wires Neal andle.pul or unplug power toots with wres.keep electric tools away frorn heat and oll Sharp
3) Personal safety
a) eep alert, pay attention to the operation and stay awake when operating electric tools.Never operate electric tools under fatigue,drugs, sicohol or therapeutic reactions.Distraction during the operation of power tools can cause serious personal
injury b) Use safety dovices. Always wear eye protection. Safety devices,such as dust masks under appropriate conditions Anti slip
safety shoes. safety helmet Hearing protection and other devices can reduce personal injury.
gAvoid sudden starting ake sure that the sunte is an the offposition when inserting the plug or battery pack. Placing your finger on the switch with power on or inserting the plug when the switch is on may cause danger
tools can cause personat injury. d) Remove alladjusting han or wrenches before turning on the power tool.Wrenches or keys left on ratating parts of electric
e) DonT stretch your hands too long. Always pay attention to your feet .
Loose clathing. accessonies Or long hair may get caught in moving parts. 1Dress appropriately Do not ear loose clothes or accessories. Keep your hair, clothes and sleeves away from moving perts
if darvices for connecting wth chip removal devices and dust collection equipment are provided, ensure that they are well
4) Use and precautions of electnic tools covnected and properly used The use of these devices can reduce the risk caused by debris.
appropriate design rating will make you work more effectively More secure. a do nor abuse electric tools, and use appropriate electric tools according to the purpose. Choosing power tools with
controlled by switches are dangerous and must be repaired. bfif the switch cannot turn on or off the power supply of the tool,the power tool cannot be used. Power tools that cannot be
c) Before any adjustment, repiacement of accessories or storage of electric tools, the plug must be removed from the power supply and /or the battery box must be disconnected from the power supply. This protective measure will reduce the risk of sudden start of electric tools
d) Store idle power tools outside the reach of children, and do not let people who are not familiar with power tools or do not understand these instructions operate power tools. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools.Check the installation deviation or jamming of moving parts, damage of parts and other conditions affecting the operation af electric
tools. If damaged, the electric tools must be repaired before use. Many accidents are caused by poorly maintained power
tock
i Yeep cutting tools sharp and clean. Well maintained
8. use electnc toals, accessories and tool heads in accordance with the operating instructions and the special type requirements of the electric tools to be used, considering the operating conditions and operations to be carried out. Using
1

What’s in the box
1 x Mini Electric Chainsaw 24w