POWR Heat Resistant Spray Paint 300ml ( 12 Pack ) – Black Engine

POWR HIGH HEAT SPRAY PAINT is made of thermoplastic acrylic resin under the advanced petroleum manufacturing techniques. It is easy to use and gives a fine spray when spraying onto surfaces. The advanced formulation provides outstanding resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.

Applications:

POWR HIGH HEAT SPRAY PAINT can be used in spraying and repairing of surfaces such as metal, wood, glass, leather, porcelain, ABS plastic and more.

Features:

• Non-corrosive.
• Fast-drying.
• Rust resistant.
• Contains no CFC’s.
• Rust resistant.
• Easy application
• Resistance to peeling, cracking, chipping and colour fading caused by all weather conditions.

Directions for use:

• Clean surfaces thoroughly – remove any dirt, grease, rust and loose paint.
• Remove loose paint with a wire brush or sand paper before spraying.
• Shake vigorously until glass agitator (mixing ball) rattles in the can.
• Apply constant pressure on the nozzle while spraying the surface uniformly from a distance of 20-30cm. Keep the can in motion from side to side so that the coating is deposited evenly.
• It is recommended to apply several thin coatings while allowing the paint to dry between coats.

Important: After use, turn can upside down and spray for 3 seconds to clear the valve and prevent clogging. If the valve clogs, pull off the nozzle and rinse in a solvent such as paint thinners.

Storage and Shelf Life:

Store in cool, dry area. Do not expose to open flame. Excessive heat can cause premature aging of components resulting in a shorter shelf life.

POWR HIGH HEAT SPRAY PAINT has a shelf life of 36 months (the expiry date is shown on the packaging), when stored at a temperature between -15 C to 30 C in its original unopened packaging

What’s in the box
1 x POWR Heat Resistant Spray Paint 300ml ( 12 Pack )