Quechua Men’s waterproof mountain walking shoes – MH500 – Grey – UK 8.5

We designed these waterproof boots at the foot of the Mont Blanc for regular hikers. Explore the mountains, and stay comfortable with every stride

Benefits:

Anatomic design
EVOFIT concept, generous fit that adapts to the width of the front of the foot

Lightweight
445g for size 43 (UK 8 1/2)

Robustness
Resistant rubber stone guards at the front and back of the foot.

Traction
Highly non-slip rubber outsole with 5mm gripping studs.

Cushioning
EVA foam with different density at the heel: comfort/protection from the ground.

Waterproof
Waterproof and breathable membrane lining: your feet dry for 6hr in all weather

Technical informations
What is your hiking frequency and intensity?
We have classified our products in terms of performance and features for 3 levels of mountain walking:

Occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain.
Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.
Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.

Sole with grip
The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (smooth, rugged, dry, wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km

Waterproofing test
In a laboratory, the shoe is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.

Making waterproofing last longer
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.

We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.

Evofit concept
This boot is fitted with the evofit concept. With its stretch materials and specific design for the area of the foot where the joints are located, evofit technology allows the boot to perfectly fit the shape of your foot.

Product design: our expertise
Our quechua global design centre is based in passy, at the foot of mont-blanc in haute savoie.

This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts.

A great asset for designing your mountain walking products and providing you with all our expertise.

Which size should i select?
The most important thing is to try on several sizes and styles of boots to find the one most suited to you!

You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction.

Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.

Buying tips / how do you try your boots on?
Some decathlon stores have a test route.
Try on both shoes, standing up, with the socks worn for hiking.
Tighten the laces, taking care to correctly balance the tightening.
Check two points:
The heel does not come up before the shoe when you walk uphill.
The foot does not slide and the toes do not press against the front when going downhill.

Try on several sizes and models.
Break them in gradually to adapt them to your foot.

Which socks?
A waterproof shoe will be less breathable than a non-waterproof shoe. Socks like the mh500 with a medium-length upper are therefore better for wicking away perspiration and reducing friction.

Optimise the capabilities of your boots: replace your insoles!
The original insole in your shoes is designed to accommodate most feet. A change of insole can bring:

Improved support: some soles are preformed or reinforced to better support the arch of the foot.
More comfort: the insoles can also provide heat and/or cushioning.
Longer life: restore the support and comfort of your shoes by replacing the insole each season.

How do you avoid blisters?
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following:

Choose a boot in your size (consult the size guide)
Wear the right type of socks
Lace up and tighten your boots properly
When you wear your boots for the first time, keep the outing short

How should you look after your shoes?
– leave to air dry.

Remove dry mud with a stiff brush.
Clean marks using a brush and some warm water
Leave to dry
Spray with a re-waterproofing product to restore the water-resistance to the upper.

Composition
Composition
Outer sole of: 5.0% polyamide, 65.0% synthetic rubber, 30.0% ethylene vinyl acetate; upper of: 35.6% polyurethane, 17.9% polyester, 46.5% leather – bovine – split; lining and sock of: 100.0% polyester

Tips for storage and maintenance
Storage tips
Store in a well-ventilated dark, dry place.

Tests and warranty
Test product
All our models are tested by users representative of our target market in conditions identical to those you encounter yourself when using them. We believe that carrying out ‘real-life’ testing is the only way to design and continuously advance the technical relevance and design of all our quechua products.

Warranty
2 years

What’s in the box
1 x Quechua Men’s waterproof mountain walking shoes – MH500 – Grey